Austro Engine E4-Series Panduan Pemeliharaan - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pemeliharaan untuk Mesin Austro Engine E4-Series. Austro Engine E4-Series 8 halaman.

4.1.4 Inserting new stud bolt

1. Screw on first standard nut M10 (red) nut onto longer thread of new stud bolt until

approx. 12mm of threaded end sticks out of the nut. Do not tighten!

2. Screw on second standard nut M10 (green) onto stud bolt

3. Insert stud bolt with screwed on nuts into clamping jaws, clamping only on hex drive

of first nut (red). Do not clamp on thread!

4. Tighten second nut (green) to 40Nm.

Issue Date: 04.08.2021

Maintenance Manual

E4-Series

Long thread

Turbocharger stud repair

E4.08.04

MM-TR-MDC-E4-469

209