Austro Flamm 45x51 Kr Buku Petunjuk - Halaman 10

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Perapian Dalam Ruangan Austro Flamm 45x51 Kr. Austro Flamm 45x51 Kr 17 halaman.

4. Operating elements

The Austroflamm inserts stand out because of their simple operation.

convection air outlet

combustion/convection air inlet

operation of the combustion

air control

door lock

operation lever for combustion air

+ = maximum air supply for fast burning

I = average heat output

– = small heat output.

•

hinged door mechanism

– press handle outwards: door unlatches – pull open.

Door can be swung open.

„release":

Release the door handle in an open position (angle > 20° ), door closes and locks automatically and the

insert is ready to be used.

•

sliding door mechanism

–

lift = door open

–

pull down = door closed

• deflection damper heat exchanger

– turn to the right: flue gases will be conducted into the heat

exchanger. This may be executed only if the insert door is closed.

– turn to the left: flue gases will be conducted directly into the chimney. The insert door may be opened

only in this position

• throttle valve

– turn to the left: flap closes.

– turn to the right: flap opens. Flue gases exit through the chimney. The insert door

may be opened now.

allowed fuel

dry, well-seasoned and natural wood (preferably hard wood) or wood briquettes.

clean combustion

the fuel wood must be dry (wood moisture < 15 %) and untreated. Moreover it is very important to use the

correct quantity of wood, in order to reach a clean and low-emission combustion. Apart from a low caloric value,

moist wood also makes your insert's glass panes soot faster than necessary. A sooting after 2-3 times of use is

normal. If you use fuel for heating which is not allowed, all guarantee or warranty claims ends

immediately!