2easy DT-603 Manual - Halaman 8
Jelajahi secara online atau unduh pdf Manual untuk Aksesori 2easy DT-603. 2easy DT-603 17 halaman. Door station flush mount
Halaman Cetak
Electric Lock Connection
Lock Controlled with Internal Power
Lock can be powered from Door Station if:
The lock is 'Power-on-to-unlock'
The lock is 12V, and holding current is less
than 250mA
'Unlocking Mode' paramenter would be 0
(default, no need extra programming)
Door Lock Controlled with Dry Contact
Note:
1.
The external power supply must be
used according to the lock
2.
The jumper must be taken off
before connecting
3.
Setup the
Unlock Mode
for different lock types
• Power-on-to-unlock type:Unlock
Mode=0 (by default)
• Power-off-to-unlock type:Unlock
Mode=1
1 2 3
1 2 3
*
of Monitor
-7-
M agnetic lock, the jumper position in 1-2
Electric lock, the jumper position in 2-3
BUS
PL
S+
EB
Take off the Jumper
BUS
PL
S +
POWER
SUPPLY
S-
LOCK
S-
LOCK