Adec 500 Panduan Pemilik - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Peralatan gigi Adec 500. Adec 500 13 halaman.

Halaman Cetak
Touchpad
A-dec 500 Assistant's Instrumentation
How to Operate Your
Standard Touchpad
Manual Chair Controls
The Base function controls chair lift, or vertical
movement. To raise the chair, press the up arrow.
To lower the chair, press the down arrow. Hold
down the arrow until the chair reaches the desired
height, then release it.
The Back function controls the chair back. To raise
the chair back, press the right arrow. To lower the
chair back, press the left arrow. Hold down the
button until the chair back reaches the desired
position, then release it.
Program Button
Use the Program button located in between
the arrows on the touchpad to save the settings for
chair positions and cuspidor cup fill and bowl
rinse times.
Position 0 (Entry/Exit)
Pressing Entry/Exit (Position 0) sends the chair to a
preset entry/exit position.
Positions 1 and 2
Pressing Position 1 or 2 on the touchpad sends the
chair base and back to a preset position.
Pressing this
position
Causes this action...
Chair base and back move to
Chair moves to a programmed
Position 1 or 2
.
， ，
operating position.
Chair back moves to an
Position 3
a
x-ray /rinse position.
Figure 7
Functions on the Standard
Touchpad.
Icon
Description
Entry /exit
Position 1
Position 2
Position 3 (x-ray /rinse)
Program button
Back down
Base down
Back up
Base up
afdec
Status icon
Cup fill
vi
Bowl rinse
al A-dec Relay Module
a2 A-dec Relay Module
Light
Page 8
aldec
86.0603.00
A-dec 500 Assistant's Instrumentation
|
Touchpad
Position 3
Position 3 is factory preset to an x-ray/rinse position. Pressing Position 3 moves the back to an
x-ray/rinse position. À second press on the button returns the chair back to the operating position. This
position can be changed to a programmable position like 1 and 2.
Cup Fill
The cup fill function allows water to flow from the cuspidor into a cup. Tap the cup fill button for a
timed operation, or hold for a manual operation.
Bowl Rinse
The bowl rinse function provides rinse water for the cuspidor bowl. Tap the bowl rinse button for a
timed operation, or hold for a manual operation.
If the bowl rinse button is pressed twice in less than two seconds, it will be set into a continuous
operation. To stop the continuous bowl rinse operation, press the bow] rinse button once.
A1/A2
Buttons
The a1/a2 buttons can be used to operate an A-dec relay module. For more details on the A-dec relay
module, contact your authorized A-dec dealer.
NOTE: You can only operate an A-dec relay module with a standard touchpad if a cuspidor is not
installed. You must upgrade to a deluxe touchpad, if you wish to operate an A-dec relay
module and a cuspidor.
A.
kd
"dec
때