Bender NGRM700 Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Monitor Bender NGRM700. Bender NGRM700 8 halaman. Neutral grounding resistor monitor (ngr)
Juga untuk Bender NGRM700: Panduan Memulai Cepat (8 halaman), Manual (8 halaman), Panduan Memulai Cepat (8 halaman)

Halaman Cetak
Quickstart
NGRM700
EN
NGR monitor
Intended use
The NGRM700 is only intended for use in high-resistance earthed sys-
tems. In these systems, the NGRM700 monitors
the NGR rated current,
 
the voltage between the star point of the transformer and earth
 
(voltage drop across the NGR),
the condition of the neutral grounding resistor (NGR),
 
line-to-line and line-to-earth voltages.
 
This quick-start guide does not replace the operating manual of the
device. Download:
www.bender.de/manuals
Safety instructions
Risk of electrocution due to electric shock!
Touching live parts of the system carries the risk of:
 
DANGER
 
 
Before installing and connecting the device, make sure that the installation has
been de-energised. Observe the rules for working on electrical installations.
Removing FP200-NGRM
PH 1
Connection X1
I2
I3
M+
Q2
Q1
NGRM700_D00292_00_Q_XXEN/09.2017
An electric shock
Damage to the electrical installation
Destruction of the device
1
X1
ET H
R
I1
Pulser IN
I1
I2
Reset IN
A
I3
Test IN
B
A
—
B
—
Ground
M+
Analogue output
Q2
Open Collector: Pulser OUT
Q1
Open Collector: System health
+
+
Output for supply of external relays (+24 V, max. 100 mA)
X1
ET H
R
OFF
ON
RJ45: Ethernet
RJ45: Remote
max. 5 m
Switch
1