BENDIX BDW46 Buku Instruksi - Halaman 12

Jelajahi secara online atau unduh pdf Buku Instruksi untuk Mesin pencuci piring BENDIX BDW46. BENDIX BDW46 20 halaman.

Halaman Cetak

Starting a washing programme

1. Check that the baskets have been

loaded correctly and that the spray

arms can rotate freely

2. Turn on the water tap

3. Close the dishwasher door

4. Setting and starting the programme

Turn the programme selector dial until the marker on the

dial corresponds with the desired programme (see

"Washing programmes" chart).

The On/Off indicator light illuminates.

The indicator lights of the phases foreseen for the

programme start flashing.

Press the START/CANCEL button, the programme starts

automatically and the START/CANCEL indicator light

illuminates.

The indicator light of the phase in progress is illuminated.

NOTE: during the running of the programme, it is not

possible to change the selection made by positioning the

programme selector dial in correspondence of another

programme. If you want to change the running washing

programme you must cancel the selection made (see "To

cancel a washing programme in progress").

NOTE: the washing programme will begin only after

having pressed the START/CANCEL button. Until that

moment it is possible to modify the selection made.

5. To interrupt or cancel a washing

programme in progress

Interrupt or cancel a washing programme in progress

ONLY if it's absolutely necessary.

Attention! Hot steam may escape when the door is

opened. Open the door carefully.

Interrupt a washing programme in progress

Open the dishwasher door; the programme will stop.

Close the door; the programme will start from the point at

which it was interrupted.

Cancel a washing programme in progress

Press the START/CANCEL button for about 5 seconds.

The START/CANCEL indicator light turns off and the

phase indicator lights are flashing.

The running programme has been cancelled and it is now

possible to set a new washing programme.

If a new washing programme is to be selected, check that

there is detergent in the detergent dispenser.

6. End of the washing programme

The dishwasher will stop automatically.

The illumination of the END indicator light indicates that

the programme has ended.

Switch off the dishwasher by returning the programme

selector dial to the Off position.

The On/Off indicator light turns off.

Open the dishwasher's door, leave it ajar and wait a few

minutes before removing the dishes; in this way they will

be cooler and the drying will be improved.

7. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should

therefore be allowed to cool down before removing from

the appliance.

Empty the lower basket first and then the upper one; this

will avoid water dripping from the upper basket onto the

dishes in the lower one.

Water may appear on the sides and the door of the

dishwasher as the stainless steel will eventually become

cooler than the dishes.

When the washing programme has finished, it is

recommended that the dishwasher is unplugged and the

water tap turned off.