Bendix/King Skymap IIIC Manual - Halaman 6
Jelajahi secara online atau unduh pdf Manual untuk Transceiver Bendix/King Skymap IIIC. Bendix/King Skymap IIIC 6 halaman. Global positioning system
Juga untuk Bendix/King Skymap IIIC: Panduan Pilot (14 halaman), Referensi Cepat (6 halaman)
![Bendix/King Skymap IIIC Manual](/uploads/products/server2/1848397/1848397.jpg)
Specifications
TSO Compliance:
Marker Beacon Receiver: TSO C35d,
Class A
KMA24—Env. Cat. A1D1/A/PKS/
XXXXXXZBAAA
Audio Amplifier: TSO C50b
KMA 24H—Env. Cat. A2D1/A/KPS/
XXXXXXB/AB/BZ/A
Weight: 1.7 lb. (0.77kg)
Physical Dimensions:
Length behind panel: 6.8 in. (17.30 cm)
Width: 6.25 in. (15.88 cm)
Height: 1.3 in. (3.30 cm)
Duty Cycle: Continuous
Power Requirements (not including
instruments lights):
KMA 24
13.75v
Idle current, mike
switch on
110 ma
Idle current, mike
Less than
switch off
8 ma
Max. operating
current
1.9 a
KMA 24H
Idle current
350 ma
Max. operating
current
1.8 a
Temperature Range: -20ºC to +55º with
brief operation at +70ºC (KMA 24),
-20ºC to +70ºC continuous (KMA 24H)
Marker Beacon Receiver
(KMA 24 only)
Frequency: Crystal-controlled at 75 MHz
Sensitivity: LO 1,000µv Hard
HI 200µv Hard
Selectivity: 6 db at ± 10 kHz Min.
40 db at ± 200 kHz Max.
©2000 Honeywell
2/00 006-08316-0008 5K Printed in U.S.A.
Policy Notice: In keeping with Honeywell's goal of constant
product improvement, product specifications and design
features may be altered without notice.
Avionics installation requires special skills, tools and equipment.
Our limited warranty is valid only for equipment installed in
accordance with our sales policy.
Input Impedance: 50 ohms
Output: Capable of 4 mw into isolation
amplifier impedance of 500 ohms.
Isolation Amplifiers:
KMA 24 Inputs: KMA 24 models without
AUTO accommodate three transceivers
and six external receivers. Models with the
AUTO function accommodate three trans-
ceivers and five external receivers. All
models also have two unswitched inputs.
(Typical use: radar altimeter aural warning
and radiotelephone ringer.)
KMA 24H Inputs: KMA 24H models
accommodate five transceivers and five
external receivers or four transceivers and
six receivers. All models also have two
27.5v
unswitched inputs. (Typical use: radar
altimeter aural warning and radiotele-
170 ma
phone ringer.)
Less than
KMA 24 Input Impedance: 500 ohms
16 ma
KMA 24H Input Impedance: 320 ohms
for all ICS inputs, 500 ohms for all
audio inputs
1.9 a
Input Isolation:
KMA 24: 40 db between inputs
500 ma
KMA 24H: 60 db between inputs
Input Muting (when mike is keyed):
1.8 a
At least 55 db
Speaker Output:
With 13.75v Supply:
Into 4 ohm load: 7 w (KMA 24)
Into 8 ohm load: 4 w
Into 8 ohm load from
8 ohm tap: 6 w (KMA 24H)
6 w (KMA 24H)
With 27.5v Supply:
Into 4 ohm load: 12 w (KMA 24)
10 w (KMA 24H)
Into 8 ohm load: 6.5 w
Into 8 ohm load
from 8 ohm tap: 10 w (KMA 24H)
Headphone Output:
KMA 24: 50 mw into 500 ohm load
KMA 24H:
With 27.5v supply: 120 mw into each
500 ohm load
With 13.75v supply: 20 mw into each
500 ohm load
Output Characteristics:
Distortion: Less than 5 percent at rated
output
Frequency response:
KMA 24: Within 6 db from 350 hz to
6,000 hz
KMA 24H: Within 3 db from 350 hz to
6,000 hz
Honeywell
23500 W. 105th Street, Olathe, KS 66061-1950
Telephone 913.712.2613 Fax 913.712.5697
Toll-Free in U.S. 877.712.2386
www.bendixking.com