dymax BlueWave AX-550 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Industri dymax BlueWave AX-550. dymax BlueWave AX-550 16 halaman. Flood lamp mounting stand kit
Juga untuk dymax BlueWave AX-550: Petunjuk Memulai Cepat (2 halaman)

Halaman Cetak

Assembly and Setup

Unpacking and Inspecting Your Shipment

When your AX light shield arrives, inspect the boxes

for damage and notify the shipper of box damage

immediately.

Open each box and check for equipment damage. If

parts are damaged, notify the shipper and submit a

claim for the damaged parts. Contact Dymax so that

new parts can be shipped to you immediately.

Check that the parts included in your order match

those listed below. If parts are missing, contact your

local Dymax representative or Dymax Customer

Support to resolve the problem.

System Interconnection

Place the light shield on the designated workbench.

Remove all packaging used for securing the unit

during shipping and save it in the event you need to

repackage the unit for return.

Suggested Sequence of BlueWave

System Connection

Remove the (4) M4 x 8 Screws from the middle

of the outer perimiter of the Top Plate. (Figure 4)

Place the Adapter Plate onto the Top Plate with

the two L-Bracket Mounting Holes toward the

rear, PEMs facing downward, and align the 4

mounting holes along the edge.

Secure the Adapter Plate to the Top Plate by

reinstalling the (4) M4 x 8 Screws removed in

the previous step. (Figure 5)

D Y M A X . C O M

AX-550 LED Curing

Figure 4.

Remove Screws

Figure 5.

Mounting the Adapter Plate

U SE R G U I D E

A X L I G H T S H I E L D K I T