dymax ACCU-CAL 150 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Ukur dymax ACCU-CAL 150. dymax ACCU-CAL 150 20 halaman. Uv radiometer

Dymax ACCU-CAL™ 150 Radiometer User Guide

Operation

Figure 2. ACCU-CAL™ 150 Radiometer Face Plate

SETUP Mode Button

Soft Button Operation

Buttons perform the

function indicated on the

Display Window bottom

line.

Unit Serial Number

Battery Door

1. Turning ON the radiometer: Press and hold the ON/OFF button until the Window Display illuminates.

The Window Display will briefly show the radiometer model name, serial number, software version,

date of calibration, range, and wavelength band installed. Continuing to depress the ON/OFF button

at startup will display the startup information until the ON/OFF Button is released. The Display

Window will then enter the default mode and show the data from the last run before the unit was

turned off.

2. Turning OFF the radiometer: Press and hold the ON/OFF button. A tone will sound. When the tone

stops, release the button. The unit will turn off.

3. Entering RUN mode: A short press of the RUN/EXIT Button clears the memory and puts the unit in

RUN mode. The Display Window shows "RUNNING" after quickly displaying the internal temperature

of the unit. Confirm that the unit shows "RUNNING" before initiating a reading.

4. Place the radiometer on the belt or object with the Optic Window (Figure 3) looking toward the UV

source. The Display Window and buttons will be facing away from the UV source. When the

radiometer exits the curing chamber, the Display Window will still be flashing "RUNNING".

CAUTION:

Exposing the Display Window to high UV radiation will damage the display.

Display Window

ON/OFF Button

Depress and Hold until

screen is illuminated.

RUN/EXIT Button

Press to enter RUN

Mode.

Press to Exit RUN

Mode.

USB PC Connector

(side of unit)