Dymec DY-H8080XR Panduan Pengguna

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih Dymec DY-H8080XR. Dymec DY-H8080XR 9 halaman. Hardened industrial 8 port gigabit flat poe switch, 8 x 10/100/1000 tx 30w pse, 48-56vdc input voltage, operating temp.: -40c to +75

Dymec DY-H8080XR Panduan Pengguna
DYMEC
User Manual-DY-H8080XR
Hardened Industrial 8 port Gigabit Flat PoE Switch, 8 x 10/100/1000 TX 30W PSE,
48-56VDC input voltage, operating temp.: -40°C to +75°C
FCC MARKING
This Equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interferenc e, and (2)
this device must accept any interference received; including interference that may
cause undesired operation.
CE MARKING
This equipment complies with the requirements relating to electromagnetic
compatibility, EN 55032/24 class A for ITE, the essential protection requirement of
Council Directive 2014/30/EU on the approximation of the laws of the Member States
relating to electromagnetic compatibility.
DYMEC, Inc. has an on-going policy of upgrading its products and it may be possible
that information in this document is not up-to-date. Please check with your local
distributors for the latest information. No part of this document can be copied or
reproduced in any form without written consent from the company.
Trademarks:
All trade names and trademarks are the properties of their respective companies.
Copyright © 2020 DYMEC, All Rights Reserved.
1