Dymec DY-HI8011-90bt Panduan Pengguna

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Laboratorium Dymec DY-HI8011-90bt. Dymec DY-HI8011-90bt 7 halaman. Hardened industrial 802.3bt gigabit poe injector, 1 x 10/100/1000m tx 90w pse + 1 x 10/100/1000m tx, 52-56 vdc input, operating temp.: -40c to +75c

Halaman Cetak

DYMEC

User Manual-DY-HI8011-90bt

Hardened Industrial 802.3bt Gigabit POE Injector, 1 x 10/100/1000M TX 90W PSE + 1 x 10/100/1000M TX,

52-56 VDC input, Operating Temp.: -40°C to +75°C

FCC MARKING

This Equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment

operated

a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is lik ely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received; including interference that may

cause undesired operation.

CE MARKING

This equipment complies with the requirements relating to electromagnetic

compatibility, EN 55032/24 class A for ITE, the essential protection requirement of

Council Directive 2014/30/EU on the approximation of the laws of the Member States

relating to electromagnetic compatibility.

DYMEC Inc. has an on-going policy of upgrading its products and it may be possible

that information in this document is not up-to-date. Please check with your local

distributors for the latest information. No part of this document can be copied or

reproduced in any form without written consent from the company.

Trademarks:

All trade names and trademarks are the properties of their respective companies.