Dymo 9000 Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Pembuat label Dymo 9000. Dymo 9000 6 halaman.

Halaman Cetak

Introduction

The Dymo 9000 Electronic Labelmaker enables you to

create a wide variety of high quality self-adhesive

labels. These instructions describe how to use your

Labelmaker in stand-alone mode; for PC-Link operation

consult the relevant sections of the Dymo Label

Software manual.

The Labelmaker uses 6mm (

19mm (

") 24mm (1") or 32mm (1

cassettes in a number of label colours. Labels can be

tab-cut for easy removal from the backing tape.

Text can be printed horizontally or

in a variety of sizes and styles and can be left-justified,

right-justified or centred on the label.

Warranty Registration

Please complete the warranty registration card and

return it to your national customer service address

within seven days – see the warranty booklet for

details.

Power Supply

AC ADAPTOR

• Connect the AC adaptor to socket

Use only the special AC adaptor designed for the

DYMO 9000 Labelmaker.

• An internal battery will retain memory settings for up

to three months. The battery is charged while the

Labelmaker is connected to the AC adaptor.

Changing the cassette

• Ensure that tape and ribbon are taut across mouths

of cassettes (wind the ink ribbon cassette on a little if

necessary before inserting cassette).

• Insert tape cassette

• Insert correct ink ribbon cassette

Note – interlocks

19mm (

") ink ribbon cassette with a 24mm (1") or

32mm (1

") tape cassette.

• Insert cassettes with tape and ribbon positioned as

shown between pinch roller

• Ensure tape and ribbon are positioned correctly.

• Ensure that the lid is closed correctly or printing will

not start.

• A sensor detects if a label is left in the cutter area.

When this occurs further printing will be prevented

until you remove the label. See 'Troubleshooting'.

• When you change to another cassette size, the

Labelmaker will prompt you to select the correct tape

width installed – see CASSETTE in the SET UP

function menu.

"), 12mm (

"),

") wide tape

as shown.

prevent you from inserting a

and print head

The Display

The display shows:

• A 'WYSIWYG' representation of the label you are

creating in edit mode and menus for selecting

functions and features.

• A status bar at the bottom of the display.

Function keys

ON/OFF

Switches the power on and off.

• Switches off automatically after ten minutes if no keys

are pressed. The last label created will be retained and

displayed when next turned on. In addition, any stored

settings will be retained.

Note: The internal battery will retain stored settings

for up to three months.

CAPITALS

• Press for all subsequent characters to be in UPPER

CASE (CAPITALS), as confirmed by the

in the status bar.

• Press again to cancel and return to lower case.

SHIFT KEY

• Press and hold down

alphabet key to produce an UPPER CASE (CAPS)

character.

• For dual purpose keys, press and hold

produce the legend above the key.

• Pressing

characters.

DELETE

DEL

• Press to delete the character to the left of the cursor, or

to exit certain function key operations.

CLEAR TEXT

• Press to clear all the current text but leave the text

size and other settings unchanged. Also use to exit or

clear certain function key operations.

ESCAPE

ESC

• Press to exit certain function key operations.

NEW

• Press to clear the workspace and return all settings

back to their default state - eg plain text, auto size, etc.

CURSOR KEYS

• Press

one character at a time.

• Press and hold to scan quickly through the text.

WYSIWYG

DISPLAY

STATUS BAR

CAPS

before pressing an

while

is set will give lower case

CAPS

CLEAR

DEL

NEW

ESC

to move the cursor along the text,

indicator

CAPS

first to