Dymo ExecuLabel LP350 Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Dymo ExecuLabel LP350. Dymo ExecuLabel LP350 17 halaman. Electronic label maker
Halaman Cetak
A label can be underlined or enclosed in a box or
background, but not both together.
To set the box style
>
1. Press the
key.
2. Select a frame style and then press
On multi-line labels, all lines are underlined. In box
style mode, all the lines are enclosed in one box
style.
Creating Multiple-Line Labels
The number of lines you can print on a label
depends on the size label you are using:
• Maximum of five lines on 19 mm (3/4") labels
• Maximum of three lines on 9 mm (3/8") and
12 mm (1/2") labels
• Maximum of one line on 6 mm (1/4") labels
To create a multiple-line label
1. Type the text for the first line, and press
new line character
the first line, but will not print on the label.
2. Type the text for the second line.
The display shows the line on which you are
currently entering text. The example below
indicates that the second line is the current line on
the label.
Use the arrow keys to move between lines.
Using Mixed Formats
You can apply different fonts and format styles to
the text on a label by inserting format breaks to
divide the label into blocks or sections of text. You
can add two format breaks allowing you to apply
three separate formats per label.
Alignment, underline, box styles, and
background patterns cannot be mixed on a label.
These styles are common to the entire label.
8
.
. A
is displayed at the end of
To add a format break
1. Enter and format text for the first section.
2. Press
.
Preview
Insert
3. Select Insert Format Break and press
new section character
of the first section, but will not print on the label.
4. Continue entering and formatting text for the
next section of the label.
Using Tabs
You can add tabs to a label to align text on multi-
line labels. Tabs are left justified and the default
spacing is 50 mm (2.0").
To change the tab spacing
1. Press
.
2. Select Set Tab Length and press
3. Use the up and down arrow keys to increase or
decrease the tab setting, and then press
To insert a tab
1. Enter your text.
2. Press the
key and continue entering text.
Using Symbols and
Special Characters
Symbols and other special characters can be
added to your labels.
Adding Symbols
The labelmaker supports the extended symbol set
as shown in Figure 12.
. A
is displayed at the end
.
.