Dymo LabelManager 300 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Dymo LabelManager 300. Dymo LabelManager 300 13 halaman.

Halaman Cetak

Introduction

The Dymo LabelManager 300 enables you to create a wide

variety of high quality self-adhesive labels of up to 90

characters.

The LabelManager uses 6mm (

(

"), 19mm (

") or 24mm (1") wide tape cassettes in a

number of label colours. Labels are back slit for easy

removal from the backing tape. Text can be printed

horizontally or vertically in a variety of sizes and styles and

can be left-justified, right-justified or centred on the label.

Visit www.dymo.com for information on obtaining tapes

and accessories for your LM300.

Warranty Registration

Please complete the warranty registration card and return

it to the relevant address, within seven days– see the

warranty booklet for details.

Power Supply

BATTERIES

• With the LabelManager positioned as shown in fig

on page 2, open the machine by hinging down the

keyboard. Apply pressure to point

tape compartment cover to release the catch, then

hinge down the cover.

• Insert six size AA alkaline or re-chargeable Nickel-

cadmium batteries, observing the polarity markings

, and close the cover.

• Remove batteries if the LabelManager is to be unused

for some time.

AC ADAPTOR (optional)

• Connect the AC adaptor to socket

adaptor plug disconnects the supply from the batteries.

• Unplug the AC adaptor from the LabelManager before

disconnecting the mains power to the adaptor,

otherwise all label memory settings may be lost (see

also ON/OFF).

Changing the cassette

• Apply pressure to point

compartment cover to release the catch, then hinge

down the cover.

• Hold as shown, then lift cassette

out.

• Ensure tape and ribbon

cassette and tape passes between guideposts before

installing as shown. If necessary, turn spool

clockwise to tighten ribbon.

• Check that cassette switch

– see page 2. A notch in the cassette will fit over the

switch when it is set correctly.

• Insert cassette with tape and ribbon positioned as

shown between print head

D❹

• Push firmly

until cassette clicks into place. Ensure

tape and ribbon are positioned correctly.

• Close the compartment cover.

"), 9mm (

"), 12mm

of the battery/

. Inserting the

of the battery/tape

straight up and

are taut across mouth of

is set for the cassette type

and pinch roller

Creating your first label

You will no doubt be anxious to see what your

new LabelManager 300 can do. Before we go on to

explore the many advanced features of the LM300, follow

these simple steps to create your first label:

1. Fit the batteries, or connect the AC adaptor, plug in and

switch on at the wall socket - see 'Power Supply'.

2. Open the battery/cassette compartment cover and

install a tape cassette – see page 2 and 'Changing the

Cassette'. Check that the cassette is fitted correctly.

3. Close the cover, then press

The welcome message 'DYMO' will appear, and then

the display should look like this:

4. Use the keyboard to type in your full name.

Each character you enter will appear on the display, for

example:

• For an UPPER CASE character, press and hold down

followed by the character required.

• Press

CASE.

• Press the space bar once for the space between each

name.

If you make a mistake, press

then type in the correction.

5. When you have finished, press

printed and will emerge from the slot in the top right

hand side of the machine. Wait until the mechanism

has stopped, then press the cutter lever E to cut off the

label and remove it from the machine.

You should now have a high quality printed name label —

don't waste it! If this is your personal machine, why not

fix the label to the underside to identify its owner? You

have just found the first of many uses for your DYMO

labels.

to switch the power on.

Cursor flashing

DYMO

for all subsequent characters in UPPER

CAPS

DEL

DYMO

to delete the error,

. A label will be