ADEERI ADR-8219 Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Konverter Media ADEERI ADR-8219. ADEERI ADR-8219 7 halaman. Industrial monitor converter
Halaman Cetak6. 6. 6. 6. Accessories&
Accessories&
Accessories&
Accessories& Details
Table 6.1 Accessories list
Item
User's Manual
Power Adaptor
half 9pin cable
9pin M-F cable
Table 6.2 Details of half 9Pin cable
Name
Wire color
A
Silver web
B
Black wire
C
White wire
D
Orange wire
E
Blue wire
F
Green wire
G
Red wire
H
Brown wire
Figure 6.2 Half 9pin cable
7. 7. 7. 7. Assembly
Assembly
Assembly
and
and
Assembly and
Step 1: access signals, if not display or display color is not correct, adjust the video source type items, adjusted to
the input video signal with the same type, color, only the normal display. (Available options are: YUV color, RGB
(D) digital TTL signals, RGB (A) mode may signal)
Step 2:The system can automatically identify the signal. If you adjust the first step, the image color display is no
need to manually adjust the normal; if there distortions in the image, you need to manually adjust the
synchronization signal and the signal source to adjust to the same types of synchronization, you can normally
display.
Step 3: If the screen shows elongated, and the overflow to the bottom of the screen, put the adjusted scanning:
Progressive Scan (Progressive); if the adjustment of the vertical position to a maximum, the image display is still
only half of the display, put the adjust the scanning mode: interlaced scan (Interlaced).
Step 4: Adjust the horizontal position, horizontal size, vertical position, vertical size of the items, adjusted to the
satisfaction of the location.
Step 5: input impedance, select the input source impedance than with select 750 in Europe, relatively light, if you
choose all 750 European white side, you should choose for the 75 euro.
Step 6: the phase adjustment, if the image appears small waves up and down type jitter, can adjust the
consistency with the input signal phase.
User's Manual
Details
Details
Details
QTY
1
1
1
2
Signal
Shield
Ground(GND)
Vertical Frequency Rate(V)
Horizontal Frequency Rate(H)
Blue(B)
Green(G)
Red(R)
Undefined(null)
debugging
debugging
and debugging
debugging
USER'S MANUAL
Remarks
English
DC12V,1A
1 Male + 1 Female
- 5 -