Dymo LabelPOINT 350 Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Dymo LabelPOINT 350. Dymo LabelPOINT 350 16 halaman. Electronic label maker
Juga untuk Dymo LabelPOINT 350: Panduan Pengguna (17 halaman), Mulai Cepat (4 halaman)
Halaman Cetak
One or more question marks appear between the
barcode symbols ( ).
???????0
You may see a 0 in the far right position for some
barcode types. This is a check digit and will be
replaced with a number when the barcode data is
entered.
4. Enter the data for the barcode, replacing the
question marks, and press
5. Enter the text you wish to appear before the
barcode on the label. (Optional)
6. Press
.
Preview
Insert
7. Use the arrow keys to select Insert Barcode, and
press
.
8. Enter any text you wish to appear after the barcode.
(Optional)
9. Press
.
G
Previewing Your Label
You can preview the text or format of your label prior
to printing. A two-line label is previewed as a single-
line label.
To preview your label
1. Press
+
Preview
Insert
2. Select Text or Format.
If you select Text, the text of the label scrolls across
the display. If you select Format, the format selected
displays briefly.
Aligning the Text
When you print a fixed length label you can choose to
align the text at the left, center, or right side of the
label. For multi-line labels, all lines of text are aligned
left, center, and right relative to each other.
when finished.
.
To align the text
>
1. Press
+
.
2. Select the desired alignment using the arrows keys
and press
.
3. Press
to turn off the alignment setting.
Adjusting the Print Contrast
You can adjust the print contrast to fine tune the print
quality of your label.
To set the contrast
1. Press
.
2. Select Print Contrast and press
3. Select a contrast setting and press
Using Labelmaker Memory
The labelmaker has a powerful memory feature that
stores text and formatting as follows:
• Automatically stores the last fifteen labels printed.
• Allows you to store the text of up to ten labels you
use frequently.
• Allows you to name and store up to ten commonly
used label formats.
Storing Label Text
The labelmaker automatically keeps the last fifteen
labels printed in a text buffer. In addition, you can
store up to ten specific labels you use frequently.
To store the current label text
1. Press
+
2. Select Save and then Label.
The first of ten memory fields is displayed.
3. Use the arrow keys to move through the fields. You
can store new text in any of the memory locations,
however, if you select a location that is filled, the
previous label text will be overwritten.
.
.
.
11