Dymo M1011 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Dymo M1011. Dymo M1011 16 halaman. Rhino
Juga untuk Dymo M1011: Panduan Pengguna (14 halaman), Panduan Pengguna (16 halaman)

Halaman Cetak

Loading the Label Tape

The DYMO M1011 is set to emboss non-adhesive aluminium or

plastic tape.

To load the tape roll

1. Hold the labelmaker in your left hand.

2. Open tape door (A).

3. Insert roll of tape allowing the end to extend about 5 cm (2")

through the tape slot.

4. Close the tape door.

5. Feed the tape between the two rollers (B).

6. Squeeze the embossing handle (F) half-way (one click) several

times to ensure the tape is inserted all the way.