Dymo RhinoPRO 1000 Petunjuk Penggunaan - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Penggunaan untuk Pembuat label Dymo RhinoPRO 1000. Dymo RhinoPRO 1000 2 halaman. Dymo rhino 1000: user guide
Juga untuk Dymo RhinoPRO 1000: Referensi Cepat (2 halaman), Panduan Pengguna (11 halaman), Panduan Pengguna (5 halaman)

Halaman Cetak

Introduction

The Dymo 1000 Electronic Labelmaker enables you to create a

wide variety of high quality self-adhesive labels of up to 100

characters.

The Labelmaker uses 12mm (

wide tape cassettes in a

2 ")

number of label colours.

Normal or double width, full and half-height text can be printed

in a single line, or in half-height on two lines.

Text can be set horizontally or

always centred on the label.

Function keys

ON/OFF

CLEAR TEXT

• Press to clear all the text and

Switches the power on and off.

the length setting, but leave the

• Switches off automatically after

print size and style settings

three minutes if no keys are

unchanged.

pressed. The last label created

will be stored and displayed

CURSOR KEYS

when next turned on.

These keys move the cursor

Note: If the batteries are removed

along the text.

for more than a few seconds, or the

external power supply interrupted,

• Pressing

all text and settings will be lost.

moves the cursor to the

When power is restored, the

beginning or end of the text.

display will show a flashing cursor

When used in conjunction with

(no text) and the settings will be full-

certain function keys, use

height, normal width, auto length,

to select options and

and

off.

numerical values.

CAPS

• To insert characters into the text,

CAPITALS

CAPS

use

• Press for all subsequent

cursor under the character to the

characters in UPPER CASE

right of the insertion point, then

(CAPITALS), as confirmed by

type in the characters required.

the indicator in the top left

corner of the display.

PRINTING

• Press again to cancel and

return to lower case.

• Press

SHIFT KEY

• Press the cutter button to

release the label.

• Press and release

before

pressing an alphabet key to

SPACE KEY

produce an UPPER CASE

character, as confirmed by the

• Press

indicator in the lower left corner

space into the text.

of the display.

FEED

• For dual purpose keys, press

• Press to feed out 25mm of tape

first to produce the legend

without printing.

above the key.

• Pressing

while

is set,

CAPS

SYMBOLS

will give lower case characters.

• Press to select a symbol

character – see 'Symbols and

DELETE

DEL

special characters'.

• Press to delete the character to

the left of the cursor, or to

cancel certain function key

operations.

DYMO 1000

TEXT SIZE

• Press to display the symbols

representing the four text print

sizes:

normal height and width

normal height, double width

half-height, normal width

half-height, double width.

The cursor will be positioned

over the current selection.

and is

• Press

to cancel, or use

DEL

to move the cursor

over the size symbol required,

then press

SIZE

CLEAR

selection, or

DEL

size and print the label.

TWO-LINE TEXT

Labels comprising two lines of

text can be printed on the 12mm

(

") wide labels.

• Press to insert the special

character

< <

you want the text to break, eg:

This label has

on the display will print as:

This label has

two line text.

Only one

to position the

a label at a time.

• Press

to delete

DEL

normal text characters.

Note: Two lines cannot be printed

vertically.

VERTICAL TEXT

to print the label.

• Rotates the text through 90

so that the label is printed

confirmed by the indicator in the

top right of the display.

to insert a

• Press again to cancel and

return to horizontal text.

FEED

SYM

SIZE

LABEL LENGTH

Displays the current label length.

The length is normally calculated

automatically, according to the

length of the text on the label.

• Press

DEL

function without changing the

length, or:

• use

400mm or 15" max.) or

decrease the length in 5mm

(

") steps. The display will

flash if you try to make the label

to confirm the

shorter than the text.

• If the length displayed is

to fix the new

preceded by the > symbol, the

length has already been fixed;

the label is too short for the text

2-LINE

and it will not print. Either press

CAPS

to increase the length in

5mm (

") steps until the >

symbol disappears, or press

CLEAR

DEL

length; the label is now long

at the point where

enough for the text and can be

printed.

two line text.

• Press

the length for all subsequent

labels as indicated in the lower

right corner of the display, or

• press

length and print the label.

can be included in

• Pressing

the fixed length and restore the

automatic length.

, as for

INCREMENTAL

PRINTING

Prints a label then increments the

VERT

last digit of any number in the

SYM

label by 1, ready for the next print

command.

, as

• Press

label, or

next label and increment again

by 1.

LENGTH

The Display

SIZE

to cancel the length

to increase (up to

The display shows:

• Up to five text characters, plus the cursor, at one

time. Use

• Four indicators, one in each corner – as shown

above.

• The display will flash if you press an incorrect key in

a function sequence.

to cancel fixed

LENGTH

again to fix

SIZE

to fix the new

CLEAR

will cancel

DEL

to print the next

to print the

Creating your first label

• Fit batteries or connect the AC adaptor, and

insert a tape cassette.

• Press

• Type in your text using the alphabet keys; each

character will appear in the display. If you make a

mistake, press

in the correction.

• Press

button to release the label.

CAPS lock on

Vertical text

12345

—

Shift on

Fixed length on

CURSOR

to move along the text.

Label cutter

button. Press to

release label.

NOTE:

Always remove

(

)

' .

a cut label

before printing

another.

< <

2-LINE

LENGTH

VERT

CLEAR

DEL

CAPS

SIZE

SYM

FEED

C ,

to switch on.

to delete the error, then type

DEL

to print the label, then press the cutter

DYMO 1000