Dymo RhinoPRO 1000 Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Dymo RhinoPRO 1000. Dymo RhinoPRO 1000 5 halaman. Dymo rhino 1000: user guide
Juga untuk Dymo RhinoPRO 1000: Referensi Cepat (2 halaman), Petunjuk Penggunaan (2 halaman), Panduan Pengguna (11 halaman)

Halaman Cetak

Introduction

The Dymo 1000+ Electronic Labelmaker enables

you to create a wide variety of high quality self-

adhesive labels of up to 100 characters.

The Labelmaker uses 6mm (

12mm (

") wide tape cassettes in a number of

label colours. Labels are tab-cut for easy removal

from the backing tape. Text can be printed

horizontally or

of sizes and styles and is always centred on the label.

Warranty Registration

Please complete the warranty registration card and

return it to your national customer service address

within seven days– see the warranty booklet for details.

Power Supply

BATTERIES

• Apply pressure to thumb catch and open hinged

access door – see fig A, page 2.

• Insert six size AA alkaline or re-chargeable

nickel-cadmium batteries, observing the polarity

markings A , and close cover.

• Remove batteries if the Labelmaker is to be

unused for some time.

AC ADAPTOR (optional)

• Connect the AC adaptor to socket A

the adaptor plug disconnects the supply from

the batteries.

• Unplug the AC adaptor from the Labelmaker

before disconnecting the mains power to the

adaptor, otherwise last label memory settings

will be lost (see also ON/OFF

Changing the cassette

• Open hinged access door as above.

• Hold as shown, then lift cassette B

and out.

• Ensure tape and ribbon B

mouth of cassette and tape passes between

guide posts before installing as shown. If

necessary, turn spool B

ribbon.

• Insert cassette and push firmly C

clicks into place.

• Ensure tape and ribbon are positioned as shown

between pinch roller C

• When using 6mm cassettes (

to slide switch B

cassettes. A notch in the cassette will fit over the

switch when correctly set.

The Display

The display shows:

• Up to eight text characters, plus the cursor,

at one time.

Use

to move along the text.

"), 9mm (

") or

in a variety

Inserting

straight up

are taut across

clockwise to tighten

until it

and print head C

") it is necessary

to the left prior to inserting

• Eight indicators – as shown below.

• The display will flash if you press an

incorrect key in a function sequence.

CAPS on

CAPS

Shift on

Function keys

ON/OFF

Switches the power on and off.

• Switches off automatically after two minutes if

no keys are pressed. The last label created will

be retained and displayed when next turned on.

Any stored last label settings will also be

retained.

Note: If the batteries are removed for more than a

few seconds, all text and settings will be lost.

When power is restored, the display will show a

flashing cursor (no text) and the settings will be

full height standard width text with

other settings off.

CAPITALS

• Press for all subsequent characters in UPPER

CASE (CAPITALS), as confirmed by the CAPS

indicator in the display.

• Press again to cancel and return to lower case.

SHIFT KEY

• Press and release

alphabet key to produce an UPPER CASE (CAPS)

character.

• For dual purpose keys, press

produce the legend above the key.

• Pressing

case character.

DELETE

DEL

• Press to delete the character to the left of the

cursor, or to exit certain function key operations.

CLEAR TEXT

• Press to clear all the current text and cancel any

fixed length setting, but leave the text size and

other settings unchanged. Also use to exit or

clear certain function key operations.

CURSOR KEYS

• Press to move the cursor along the text, one

character at a time.

• Press and hold to scan quickly through the text.

Italic

Box

Underline

ITALIC

1 2 3 4 5 6 7 8

CURSOR

CAPS

Press only - DO NOT HOLD DOWN

before pressing an

while

is set will give a lower

CAPS

CLEAR

DEL

Vertical

Outline

text

OUTLINE

VERT

LENGTH

SET

Fixed label

length set

and all

first to