Dymo LabelPoint 250 Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer Dymo LabelPoint 250. Dymo LabelPoint 250 15 halaman. Electronic labelmaker
Juga untuk Dymo LabelPoint 250: Panduan Pengguna (13 halaman), Daftar Fitur (2 halaman)

Halaman Cetak

Troubleshooting

Review the following possible solutions if you encounter a problem while using your labelmaker.

Problem/Error Message

No display

Poor Print Quality

Poor Cutter Performance

Printing

Too many characters

Exceeded maximum number of characters in buffer.

Too many lines

Exceeded maximum number of lines allowed.

Insert Tape Cassette

Label cassette missing or empty.

Battery low

Batteries almost discharged.

Tape Jam

Motor is stalled due to label jam.

Too many pages

Exceeded maximum number of format breaks allowed.

Page not empty

Tape size too small

Set

Fixed-length label selected and the length necessary to

print the label exceeds the selected length.

If you still need assistance, contact DYMO Customer Support. Refer to

of this User Guide to locate the contact number for your country.

Solution

• Ensure the labelmaker is turned on.

• Replace discharged batteries.

• Replace discharged batteries or attach power adapter.

• Ensure label cassette is installed properly.

• Clean the print head.

• Replace the label cassette.

Clean the cutter blade. See Caring for Your Labelmaker

No action required.

Message disappears when printing is finished.

Delete some or all of the buffer text.

Select another format.

Insert a new label cassette

Replace batteries or connect AC power adapter.

• Remove jammed label and replace label cassette.

• Clean cutter blade.

Change label layout.

Delete all content on the page.

Change label size or change the formatting on the label.

• Following this message, a fixed-length value is

displayed which indicates the minimum label length

necessary to fit the text. Do one of the following:

• Adjust the fixed-length label setting appropriately, or

• Select a narrower font size.

Contacting Customer Support

at the back