Dymo LabelPoint 250 Panduan Pengguna - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer Dymo LabelPoint 250. Dymo LabelPoint 250 13 halaman. Electronic labelmaker
Juga untuk Dymo LabelPoint 250: Panduan Pengguna (15 halaman), Daftar Fitur (2 halaman)
Halaman Cetak
Troubleshooting
Review the following possible solutions if you encounter a problem while using your labelmaker.
Problem/Error Message
No display
Poor Print Quality
Poor Cutter Performance
Printing
Too many characters
Exceeded maximum number of characters in buffer.
Too many lines
Exceeded maximum number of lines allowed.
Insert Tape Cassette
Tape cassette missing
Battery low
Batteries almost discharged.
Tape Jam
Motor is stalled due to tape jam.
Too many pages
Exceeded maximum number of pages allowed.
Page not empty
Tape size too small
Set
Fixed-length label selected and the length necessary to
print the label exceeds the selected length.
If you still need assistance, contact DYMO Customer Support. Refer to
inside backcover to locate the contact number for your country.
Solution
• Ensure the labelmaker is turned on.
• Replace discharged batteries.
• Replace discharged batteries or attach power adapter.
• Ensure tape cassette is installed properly.
• Clean the print head.
• Replace the tape cassette.
Clean the cutter blade. See Caring for Your Labelmaker
on page 10
No action required.
Message disappears when printing is finished.
Delete some or all of the buffer text.
Select another format.
Insert a new tape cassette
Replace batteries or connect AC power adapter.
• Remove jammed tape and replace tape cassette.
• Clean cutter blade.
Change label layout.
Delete all content on the page.
Change label size or press Cancel to exit Box/Background
menu.
• Following this message, a fixed-length value is
displayed which indicates the minimum label length
necessary to fit the text. Do one of the following:
• Adjust the fixed-length label setting appropriately, or
• Select a narrower font size.
Contacting Customer Support
on the
11