Gacell CT-7000 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengisi Daya Baterai Gacell CT-7000. Gacell CT-7000 12 halaman.

hours)

STEP 3: ANALYSE (Check if the battery voltage reaches to the threshold

after desulphation, and charging begins if the battery voltage is OK)

STEP 4: SOFT START (Charge with echelon constant current)

STEP 5: BULK (Charge with constant maximum current until battery

voltage is reached to the threshold)

STEP 6: ABSORPTION (Provide gradually declining current charge for

maximum battery voltage)

STEP 7: ANALYSE (Test if the battery can hold charge)

STEP 8: MAINTENANCE (Continuously monitor the battery, and charging

current will intelligently adapt to the variable battery voltage)

LED

25%

50%

75%

100%

The 25% Charge Red LED will slowly flash when the

battery level is less than 25%. When 25% is reached,

the LED will be solid.

The 50% Charge Red LED will slowly flash when the

battery level is less than 50%. When 50% is reached,

the LED will be solid.

The 75% Charge Red LED will slowly flash when the

battery level is less than 75%. When 75% is reached,

the LED will be solid.

The 100% Charge Green LED will slowly flash when

the battery level is less than 100%. When 100% is

reached, the 100% Charge LED will be solid. The

25%, 50% and 75% Charge LEDs will turn off.

Explanation