Dymo RhinoPRO 3000 Buku Petunjuk - Halaman 8

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Printer Dymo RhinoPRO 3000. Dymo RhinoPRO 3000 17 halaman. Label printer
Juga untuk Dymo RhinoPRO 3000: Brosur & Spesifikasi (2 halaman), Lembar data (2 halaman), Mulai Cepat (2 halaman), Referensi Cepat (2 halaman)

Halaman Cetak

Deleting a Label from Memory

When you no longer need a stored label, you can

delete it from memory.

To delete a label from memory

1. Press

. The memory locations are

RECALL

displayed.

2. Use the arrow keys to move to the memory

location that contains the label you want.

3. Press +

and then press

memory location.

Using the Hot Key Functions

Your printer includes several Hot Key

that allow you to print specific types of labels. Hot

Keys are available for printing flag, wrap, fixed-

length, distribution panel, and vertical labels.

HWRAP

When you select flag, wrap, fixed, or vertical print

modes, the labelmaker remains in that print mode

until you either select another hot key or select

normal mode.

To select normal mode

Press

♦

FLAG

Printing in Flag Mode

Flag labels wrap around a wire or cable leaving the

text part of the label extending out from the cable.

See Figure 10.

FM RM

Figure 10

The default diameter is 3/8" (9 mm). The length of

the label tape between the label text ( ) is

approximately 1.1" (28.27 mm).

The text on flag labels is automatically printed on

both ends of the label leaving a blank space in the

middle that wraps around the cable. When the label

is applied to the cable, both ends of the label are

applied back to back leaving a tail or flag. The

result is a label that can be read from both sides.

To print a flag label

1. Press

2. Enter the text for the label and press

to clear the

ESC

Printing Wrap Labels

You can create labels that wrap around a cable or

wire. A line of text is placed horizontally or vertically

along the width of the cable, and repeated so that

functions

you can read the label from any angle.

Horizontal Wrap Labels

Horizontal wrap labels can contain

letters, numbers, or symbols.

To print horizontal wire wraps

1. Press

2. Enter the label text and press

Vertical Wrap Labels

Vertical wrap labels are printed in a

fixed length of 1.5" (40 mm) and can

contain up to five letters or

numbers; but no symbols.

To print vertical wrap labels

1. Press

2. Enter the label text and press

FM RM

Printing Fixed-Length Labels

Normally, the length of the label is determined by

the length of the text entered. However, you may

wish to make a label for a specific purpose that is a

fixed length regardless of the length of the text.

FLAG

HWRAP

Left Speaker