5five F26R Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penerima Mobil 5five F26R. 5five F26R 20 halaman. Car aux /usb/microsd receiver with bt function

Halaman Cetak

Track selection

Briefly press the

button to switch to the previous file or the next.

The display will show the file number. Press the

button while

holding to scroll backward / forward. Playback starts when the button is

released.

Pause playback

Press the 1/

button to pause playback. Press the 1/

button again to

resume playback.

Preview all files

Press the 2 / INT button on the front panel. The INT ON indicator will appear

on the display, after which overview playback of each file will begin for 10

seconds. After the scan of the last file has finished, playback of the file from

which the scan started will begin. To interrupt the scan operation, press the

2 / INT button again.

Repeat file playback

To enable the file repeat mode, press the 3 / RPT button. When the 3 / RPT

button is pressed again, all files will be played back.

Play all files in random order

Press the 4 / RDM button to play all files in random order. Press the button

again to cancel the function.

Note:

The INT, RPT, RDM modes are switched on the first time the corresponding

buttons are pressed, and a brief indication appears on the screen to turn

on the mode (INT ON, RPT ON, RDM ON). Pressing the corresponding buttons

again disables the modes with a brief indication on the screen that the

mode is turned off (INT OFF, RPT OFF, RDM OFF). At the same time, INT, RPT,

RDM cannot work. Only the last selected mode remains active with the

corresponding indication on the screen.

Skip 10 tracks back

To go back 10 tracks, press the 5 / -10 button with hold

Skip 10 tracks forward

To go forward 10 tracks, press the 6 / + 10 button with hold

SD card management

On the front panel of the receiver there is a slot for connecting SD-memory

cards (card reader). When you connect an SD memory card to a

compatible interface, the system will search for audio files on the memory

card. When files are detected, playback will start. Management of the SD

interface is similar to the management of the USB interface, which was

described above. SD mode selection is initiated using the button

Note:

1. The device only supports standard USB flash drives that are approved by

Microsoft.

2. USB-MP3-players are not standardized, which means that different

brands and different models may have their own standards. The system

may not support all MP3 players.