Active Products XE03 Panduan Pemilik - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Mesin Cuci Tekanan Active Products XE03. Active Products XE03 19 halaman.

Halaman Cetak
TROUBLESHOOTING
Output pressure varies high
and low. (continued)
Detergent not working.
Garden hose connection leaks.
nozzle leaks.
Pump is noisy
Water leaks from pump (up
to 10 drops per minute
is permissible).
Oil is dripping
Cause
Discharge nozzle is obstructed.
power nozzle.
Detergent container is empty.
Detergent bottle or suction
tube not properly connected.
Detergent is too thick.
Filter on detergent suction
tube is clogged.
Damaged or clogged deter-
gent suction tube.
Nozzle is in high-pressure
position.
Discharge nozzle is obstructed.
Missing/worn rubber washer.
Pump is sucking air
Water filter is clogged.
Water seals are damaged
or worn.
Oil seals are damaged or
worn.
17
with a fine needle.
Run distilled vinegar
through detergent tank.
Add more detergent.
Check connections.
Dilute detergent.
Run warm water through
filter to remove build-up.
Remove obstruction or
replace detergent
suction tube.
Turn nozzle tip to low-pres-
sure position.
with a fine needle.
Tighten fittings.
Insert new washer.
Call the Toll-Free Hotline.
Check that hoses and fit-
tings are airtight. Turn off
machine and purge pump
by squeezing trigger gun
emerges through the nozzle.
Remove water filter and
rinse in warm water.
Check that all fittings are tight.
Call the Toll-Free Hotline
Call the Toll-Free Hotline