Dyna-Glo DGSS287CB Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk panggangan Dyna-Glo DGSS287CB. Dyna-Glo DGSS287CB 16 halaman. Heavy-duty charcoal grill & offset smoker box

Halaman Cetak

ASSEMBLY INSTRUCTIONS

Using the Firebox as an Offset Smoker (Optional).

This grill is also compatible as an offset smoker box for

Dyna Glo grill models DGSS675CB-D and DGSS443CB-D.

Optional Step A.

NOTE: The leg assemblies (J) can remain on the

offset smoker box, or removed prior to installing.

When removing the legs, be sure to reinsert the

M6 x 12 bolts into the holes on the bottom section of

the grill/smoker body (K).

To install the offset smoker box, remove the access door

on the side of the primary grill and the adapter plate

(Part M, not shown) on top section of the offset smoker

box (L). Reuse the hardware from the adapter plate and

insert two M6 x 12 bolts with at least 1/4" (6mm) of the

bolt exposed on the left and right side of the opening

on the top section of the smoker box (L). Insert the bolt

heads inside the keyholes on the side of the primary grill.

Do not tighten.

Optional Step B.

Insert the remaining four M6 x 12 bolts from inside the

primary grill body and tighten all bolts - including the side

bolts for the keyholes.