GREADEN GR2RM2-E Petunjuk Keselamatan dan Manual Pengoperasian - Halaman 6
Jelajahi secara online atau unduh pdf Petunjuk Keselamatan dan Manual Pengoperasian untuk Pemanas Teras GREADEN GR2RM2-E. GREADEN GR2RM2-E 20 halaman. Infrared
Halaman Cetak
•
The appliance is not located immediately below a wall socket-outlet.
•
The casing and the front cover of the appliance become extremely hot during operation.
Pay attention that, no combustible material due to wind or other environmental influ-
ences covers or obstructs the appliance, such as curtains, marquees, flags, plastic foil etc.
Do not touch the appliance. Caution! Risk of scald injury!
•
In case of improper use, there is a risk of electrical shock and/or fire hazard. Operation
of the appliance must be discontinued and remove the mains plug immediately. Do
not try to repair the appliance by your-self. Please contact with the service agent or a
suitably qualified electrician for maintenance.
•
Remove the plug from the power outlet and wait until the appliance is sufficiently
cooled off before cleaning.
•
Keep out of reach of children. To keep children from the dangers of electrical applianc-
es, never leave them unsupervised with the machine. Consequently, when selecting the
location for your machine, do so in such a way that children do not have access to the
machine. Children being supervised not to play with the appliance.
•
The appliance must only be mounted by an authorized specialist, paying attention to
the relevant regulations of the power supply companies and the regional construction
regulations.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
•
Remove all package material (including anti-vibration object of the lamp) and check the
appliance, supply cord and the plug for signs of damage.
•
Pay attention to the mounting place and all mounting material (dowels, screws). Ensure
they are suitable and stable enough for mounting and lastingly holding of the appliance.
•
Before mounting, the minimum safe mounting distances and tilt angles shown in the
figures must be strictly followed.
•
The distance between the bottom edge of the appliance and the floor must be at least 1.8
M. See figure 3.
•
There must be a distance of at least 0.2 M between the appliance and the ceilings, roofs
or other covers. See figure 3.
•
There must be a distance of at least 0.5 M at each side between the appliance and walls
or the like. See figure 3.
•
Recommended degree to mounting surface is 45°. See figure 4.
•
Pay attention that, the installation of the appliance must not add excessive wind load.
•
Fix the mounting bracket on the wall first. Ensure that the place to be installed is secure
and firm. Or connect the appliance to the stand.
•
Adjust the desired angle of radiation and fest screw all screws. Check regularly the
screws' connection. Mechanical bearing pressure and oscillation due to wind or rain
could lead to lose.
•
Plug in the power source and operate the remote control. Then observe, whether during
the first 10-15 minutes the appliance works trouble-free.
•
If you do not use, please remove battery socket
6
EN