Gage Bilt GB703 Panduan Instalasi - Halaman 20
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Alat Listrik Gage Bilt GB703. Gage Bilt GB703 20 halaman.
Halaman Cetak
Unless ordered rivet specific (I.E. GB743/4N), the GB743 series riveters are
furnished with nose assembly 8N-743A-24 and spare nose tip 10204 to convert
to 6N-743A-24. All other nose tips must be ordered separately. When ordering
tool rivet specific, contact Gage Bilt for more information.
"VT" riveters are not furnished with the nose assemblies above and must
be ordered for your specific rivet.
OPTIONS
The GB743 series riveters may be ordered with a vacuum system.
Gage Bilt offers two varieties (see below).
Order GB743 series riveters rivet specific by adding the appropriate suffix
(see selection chart).
HOW TO ORDER GB743 SERIES TOOLS
TOOL SERIES
SH - SPLIT HANDLE MODEL
SR - SPLIT RIVETER MODEL
NO DESIGNATION - STANDARD MODEL
Catcher Bag, Air Bleeder Assembly and Extensions
Catcher Bag
#704214 (Equivalent to #670A20)
GB703SH
Stroke - .780" (19.8 mm)
Hand held weight - 2.00 lbs (.9 kg)
Entire tool weight - 7.25 lbs (3.3 kg)
Pull load - 2,200 (9.8 kN)
DEXRON® IS A REGISTERED TRADEMARK OF GENERAL MOTORS CORPORATION. LUBRIPLATE® IS A REGISTERED TRADEMARK OF FISKE BROTHERS REFINING. LOCTITE® IS A REGISTERED
TRADEMARK OF HENKEL CORPORATION.
S/N: 3191 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
(SOLD SEPARATELY)
GB743
SH V / 8N
8N - RIVET SPECIFIC DESIGNATION
(SEE SELECTION CHART)
NO DESIGNATION - STANDARD
V - VACUUM W/ COLLECTOR BOTTLE
VT - VACUUM W/ EVACUATION TUBE
NO DESIGNATION - NO VACUUM
Air Bleeder Assy
#704153 (Equivalent to #700A77)
Alternative Styles
ACCESSORIES
"V" DESIGNATION = PINTAIL COLLECTION BOTTLE
"VT" DESIGNATION = PINTAIL EVACUATION TUBE
(TOOL MUST BE ORDERED FOR YOUR SPECIFIC RIVET.
CONTACT GAGE BILT INC. FOR SPECIFIC APPLICATIONS.)
Hand held weight - 1.50 lbs (.7 kg)
Entire tool weight - 4.50 lbs (2 kg)
20
Extensions
These extensions help reach many
restricted areas by increasing the overall
length of the nose assembly. They fit
directly on the GB703 Installation Tool.
L
Part Number Equivalent to:
2"
703002
4"
703004
6"
703006
GB703SR
Stroke - .780" (19.8 mm)
Pull load - 2,200 9.8 kN)
743A50
-
-
4/12 Rev. 1/17