Grease Guardian D3 Panduan Pemasangan, Pengoperasian, dan Pemeliharaan - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pemasangan, Pengoperasian, dan Pemeliharaan untuk Peralatan Industri Grease Guardian D3. Grease Guardian D3 15 halaman. Automatic grease removal unit
Halaman Cetak
CONTROLLER ADDITIONAL SETTINGS:
TIME RESET AND 7 DAY SETTING
Time of day Set
From the main display access the above display
by pressing OK and ESC together. Choose
"Miscellaneous" using - or + keys then press OK
In the follow on display use the + and - keys to
move the flashing bar to select "CLOCK". Press OK to
confirm.
Next, use the + and - keys to select "DATE/HOUR
SETUP", and press OK
Use the + and - keys to move the flashing bar to
select current hour and minutes blocks. Enter and
change these digits by pressing OK, then use + and
- keys to increase/decrease values. Press OK to
confirm current value. Press ESC to save and return
to home display.
10
7 day ON/OFF Control
From the main display access the above display by
pressing OK and ESC together. Choose "Parameter"
using - or + keys then press OK
The display to the left will show. Next using only the
"-" key move the cursor to the "D:MTWTFSS" block
(days of week). To access particular day value press
OK. Then press "-" to cancel any day. Pressing OK
confirms cancellation and moves the cursor to the
next day. On reaching final Day value, S, press OK to
confirm all.
Example: Controller set to OFF at weekends; the
display is configured as shown left. Press ESC to exit
to home display
11