Gage Bilt GB752SR Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Listrik Gage Bilt GB752SR. Gage Bilt GB752SR 13 halaman. Installation tool

PRINCIPLE OF OPERATION

When the lever ass'y is depressed, the pressurized air inside of the tool is released allowing spring pressure

to move the valve spool causing the air to be redirected. The air is directed to the top of the air piston ass'y,

moving it in a downward direction. The air below the air piston ass'y is then directed through the valve

sleeve and exhausted out of the bottom of the tool. Simultaneously, the piston rod ass'y connected to the air

piston ass'y is also moving down, forcing hydraulic oil up and into the front side of the head cylinder ass'y,

causing the piston to move to the rear of the head cylinder ass'y. The internal components of the attached

nose assembly are also moving with the piston to start the fastener installation.

installation is completed, the lever ass'y is released. Air pressure is then built up inside of the handle

causing the valve spool ass'y to return to its original position and reversing the sequence directing air

pressure to the rear of the head cylinder ass'y, causing the piston to move to the forward position.

CYLINDER

HEAD

OIL

PRESSURE

AIR

PRESSURE

AIR

PISTON

HEAD

PISTON

ROD

AIR

PRESSURE

VALVE

SPOOL

EXHAUST

Image may not reflect actual tool

AIR

PRESSURE

AIR

PISTON

AIR

PRESSURE

When the fastener

AIR

PRESSURE

AIR

PRESSURE

REV. 2/14

AIR