Hi Sharp HS-CX9100 Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan Hi Sharp HS-CX9100. Hi Sharp HS-CX9100 3 halaman.

R AR PANEL

INSTALL STEPS

1. Make the camera on the bracket stable.

2. The Video output has two type of connections (video can be

output at the same time)

2.1. Use the BNC connector (75Ω Coaxial cable) then

connected with video in device (monitor , Matrix , DVR)

2.2. Use the UTP twisted pair to connect UTP receiver then the

receiver connected with video in device (Monitor, Matrix,

DVR)

3. Then connect the 75Ωcoaxial cable to device video in.

4. Put the power cable on.

5. Users may adjust the camera poison and angle in different

environment.

UTP SYSTEM