5th Wheel G1 Panduan Pengguna - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Skuter 5th Wheel G1. 5th Wheel G1 18 halaman.
9 About Charging
Remove the rubber
protective cover of
the charging port.
1.Remove the rubber protective cover, and insert the charger connector
into the charging port of the body.
2.Insert the power plug of the charger into the power socket.
3.When the charger indicator is red, it indicates that the battery is being
charged. When the charger indicator turns green, it indicates that the
battery has been fully charged.
4.Requirement to power-off the vehicle during charging, or into a certain
non-operational mode.
10 About the Battery and Charger
Each G1 electric scooter is equipped with a dedicated lithium battery and smart charger. Both the
scooter and its accessories have product identification numbers. It is forbidden to use the chargers of
other brands. The chargers provided by the company must not be used for other purposes. The compa-
ny is not responsible for the resultant damage to the battery or charger.
Battery
The lithium battery provided by the company can be recharged for at least 800 times, and more than 1,000
times under normal circumstances. Please charge full battery for the first time before using it. The battery can
be charged at any time, and there is no any damage to charge it frequently. Meanwhile, please don' t forget to
charge it per 3 months if you don' t use it for a long term.
22
Connect the
After charging,
charger.
push the rubber
protective cover back in
Charger
The dedicated charger provided by the company has a function of charging protection. When the battery is
100% charged, the charger will be powered off automatically. The charging time is about 4-5 hours. Damage to
the battery arising from water, collision and other abnormal factors is excluded from the warranty policy.
Temperature range of charging and cycling environment:10℃-40℃.
搭配的充电器信息 (厂家、 型号、 参数) 。 ,
Charging instructions
1. Open the rubber and insert the plug into the hole;
2. Insert another plug of the charger into the electric outlet;
3. When the indicator lamp is red, it shows the battery being charged; When the lamp turns green, the battery
is finished charging.
4. Please shut down and keep away from water before charging.
5. Only use the specified charger for charging.
Warning: Please be careful not to get electric shock.
6.
Kinetic energy recovery
Press the brake in the running process to enable the kinetic energy recovery system and convert part of kinetic
energy into electrical energy to be stored and used. The kinetic energy recovery system can enhance the
experience of emergency braking. At the same time, the recovered kinetic energy can help increase the
endurance. Changes in the power are displayed simultaneously.
23