Dyna-Glo RMC-LPC25DG Panduan Pemasangan, Pengoperasian, dan Pemeliharaan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pemasangan, Pengoperasian, dan Pemeliharaan Pengguna untuk Pemanas Dyna-Glo RMC-LPC25DG. Dyna-Glo RMC-LPC25DG 15 halaman. Propane construction heater
Juga untuk Dyna-Glo RMC-LPC25DG: Panduan Pemasangan, Pengoperasian, dan Pemeliharaan Pengguna (11 halaman), Panduan Pemasangan, Pengoperasian, dan Pemeliharaan Pengguna (14 halaman)
Halaman Cetak
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!
LPC25 Series
LPC80 Series
LPC200 Series
The heater is designed for use as a construction heater in
accordance with ANSI Z83.7, CSA 2.14. Other standards
govern the use of fuel gases and heating products for
specific uses. Your local authority can advised you about
these. The primary purpose of construction heaters is to
provide temporary heating of building under construction,
alteration or repair. Properly used, the heater provides
safe economical heating. Products of combustion are
vented into the area being heated.
For Technical Support or Troubleshooting, Call: 1-877-447-4768
(lb/h)
Minimum
Maximum
Maximum
1.16
0.7
(0.53 kg/h)
(0.32 kg/h)
3.71
2.32
(1.68 kg/h)
(1.05 kg/h)
9.28
2.32
(4.21 kg/h)
(1.05 kg/h)
Minimum
The heater must be located at least 6 ft. (1.83 m) in the
U.S.; or (ii) 10 ft. (3 m) in Canada, from any propane gas
container.
CLEARANCE TO COMBUSTIBLES:
2 ft. (60 cm)
4 ft. (1.22 m)
www.ghpgroupinc.com
.196
11.7 x 12.87
(4.98 mm)
(29.69 x 32.79 cm)
.196
15.9 x 18.3
(4.98 mm)
(40.41 x 46.99 cm)
.196
15.9 x 26.2
(4.98 mm)
(40.41 x 66.49 cm)
2 ft. (60 cm)
3 ft. (91 cm)
5 ft. (1.52 m)
6 ft. (1.82 m)
(37.8 °C).
3