Hi-Capacity CH-5630 Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengisi Daya Baterai Hi-Capacity CH-5630. Hi-Capacity CH-5630 3 halaman.

3.3. LED Status

LED state

Solid Red

Solid Green

Blinking Red * Pack voltage < 10V OR Pack temperature> 117.5ºF (47.5°C) OR

* Note: The continuously blinking red LED indicates that one of the above fault condi-

tions may exist. First remove the battery from the charger bay and re-insert it to confirm

that a fault condition exists. While the LED is blinking red, the charger is not charging the

battery. If the LED continues to blink red, remove the battery from the charger bay and

disconnect the AC power from the charger.

4. Certification

This battery charger complies with part 15 of the FCC rules.

Charging Rate: 2.6A Max. per bay

Charging Time: 1.5~2.5 hours per battery

Power Requirement: 20V, 3.6A Max, 72W AC/DC Adapter

Operating Temperature: 32 – 104ºF (0 – 40ºC)

Safety Protection: Over-temperature /current/voltage protection

Physical Dimensions: 6.7 x 4.7 x 2.2 inches (170x120x55mm)

6. Warranty

This battery charger is guaranteed for one year from the date of purchase against

defects in materials and workmanship. If the charger develops such a defect during the

warranty period the charger will be repaired or replaced at manufacturer's option. This

warranty does not cover damage caused by misuse and everyday wear and tear.

Defective chargers should be returned to the dealer from which they were purchased.

Under no circumstances will the manufacturer be liable for any of the following: loss or

damage to personal property; any damage caused to the charger by repair attempts not

authorized by manufacturer; any other incidental or consequential damages caused by

the user or improper use of this product.

Meaning

Charging

Fully Charged. Charging is complete

Constant charging time for one battery > 120mins (Remove and

re-insert to confirm)

CH-5630 Battery Charger - User's Manual