Dawnco STARLOOK- D Manual - Halaman 15
Jelajahi secara online atau unduh pdf Manual untuk Unit distribusi daya Dawnco STARLOOK- D. Dawnco STARLOOK- D 16 halaman.
Halaman CetakV. Technical specification.
Input frequency:
Frequency display:
Min level in,
Max level in,
Attenuation:
Display of signal level (analog):
Accuracy:
Display of signal level (digital):
TV/Audio standard:
KU- C-band:
Audio bandwidth :
Input impedance:
Picture-screen:
Menus:
Memory:
Favorite channels
PC-connection
Voltage out:
22 kHz tone:
DiSEqC
DiSEqC actuator:
Battery:
Operational:
Weight:
Accessories:
DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • [email protected]
920-2150MHz, easily reduced to 250 MHz (max zoom in).
Yes, IF default. All standard LNB L.O. can be setup.
About 35 dBuV (noise level).
About 90 dBuV.
15 dB manual attenuator on/off.
dB-level on LCD and monitor.
Pitch-tone on loudspeaker.
+2 dB (at +20 C)
S/N (signal/noise-ratio)
BER (bit error rate)
Constellation diagram (QPSK)
Multi TV/Audio (PAL, NTSC, SECAM).
Yes, selectable.
Adjustable between 5.5 MHz and 8.5 MHz
75 Ohm, BNC-connector.
4.5"-monitor, black / white.
On LCD 64x128 next to the monitor.
-100 spectrum pictures can be stored with name.
Stored spectrum can be mixed for easy identification of satellite.
-"Maxhold"-function.
Both analog and digital frequencies can be stored (with name).
Simultaneous measuring of up to 10 channels at the same time.
Each channel with individual setup of 13/18v and 22 kHz on/off.
Yes, RS232-output
Yes, 13-18V (can be adjusted).
Yes, on/off.
Yes, all 1.0 and 1.1. Also Tone burst on/off.
Built in positioner for DiSEqC 1.2, SatScan and SatSelect.
Rechargeable 12v, 3.5 amp/h.
About 1.5 hour on a fully charged battery.
About 5 kg incl. battery
Nylon carrying-case.
Power-supply of 220v/13.5v, 1.7amp
Car-charger.
BNC-male/F-female adapter.
Owners' manual
(14)