Hi-FiD HFD-X1 Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembicara Hi-FiD HFD-X1. Hi-FiD HFD-X1 6 halaman.

1. AUX IN Port

Use this port to connect an external media device via the audio cable.

2. Charging Port

Insert the power cord into the Micro‐USB port of the device(Use with 5V/1A adapter).

Charging begins automatically even if the device is powered off. (USB power adapter not

included)

3. TF Card Port

Insert the TF card into this slot to play stored media sources.

INSTRUCTIONS

Blutooth Mode

1. Press and hold the bluetooth button for 2 seconds to enter bluetooth pairing mode with a

sound alert "Pairing", the indicator is flashing fast in blue.

2. BT Pairing Mode will automatically be canceled after 3 minutes. To re‐enter pairing mode,

simply begin again at step #1.

3. Ensure bluetooth is enabled on the device you wish to pair with the speaker.

4. Keep your device within 3 feet with the speaker, and search bluetooth name "X1" on your

device to pair them together (sometimes called a "Passkey", "PIN Number" enter "0000").

5. Play music to enjoy amazing wireless sound by the speaker.

6. The speaker will record this device as the last device paired.

7. Incoming calls will override music and other media with an incoming call voice alert, simply

press the button "Play/Pause" to answer/end or press and hold for 2 seconds to decline the

call.

8. When in BT mode, press the button "Play/Pause" press and hold 2S to activate Siri/ S‐Voice.

9. Should you wish to switch music players, simply press and hold the bluetooth button to

disconnect the paired device, then re‐press and hold the button to enter pairing mode like

normal.