Active Silicon AS-CIB-IP-001-A Panduan Memulai Cepat - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Aksesori Kamera Active Silicon AS-CIB-IP-001-A. Active Silicon AS-CIB-IP-001-A 7 halaman. Harrier ip camera interface board
Juga untuk Active Silicon AS-CIB-IP-001-A: Panduan Memulai Cepat (13 halaman)
Halaman CetakControlling the Camera
The camera can be controlled using the ONVIF media services or the Harrier IP web pages:
•
In your web browser, enter: http://<IP Address> to access the website.
•
From the menu on the left-hand side, select the Maintenance page.
•
Select the correct camera model (T1x1x).
•
From the menu on the left-hand side, select the Camera Control page.
The text entry box (see figure 9.) allows you send VISCA commands/inquiries to the camera so that you can
control all of its features (zoom, auto exposure, white balance, etc.). For convenience, a small number of
features have been mapped to buttons on the web page.
Note: the camera video mode setting should not be changed using a VISCA command; the Maintenance
web page should be used for this function.
Figure 9. Harrier IP Camera Control web page
Figure 10. Harrier IP Maintenance web page
March 2022
HARRIER IP CAMERA INTERFACE BOARD
QUICK START GUIDE
Version 1.02 – March 2022
Page 5 of 7