Hi-Force HTW Series Panduan Petunjuk Pengoperasian - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Alat Listrik Hi-Force HTW Series. Hi-Force HTW Series 7 halaman. Manual torque wrench range
Halaman Cetak
Upon receipt of the product, visually inspect the item for any evidence of shipping damage. Please note: the
warranty does not cover shipping damage. Notify the courier immediately if shipping damage is found and refrain
from putting the product into service. The carrier is responsible for repair and replacement costs resulting from
damage in transit shipping.
Important Note:
Before putting this Hand Torque Wrench into operation, please validate the certificate (provided along with
this tool) by completing the section "date of first issue, sign and stamp."
This operation manual covers the HTW range of manual torque wrenches. The HTW-B type tools feature a "break-
back" design to give a very clear indication of the required torque being reached
3.1 Introduction
Read and follow all the instructions and safety warnings carefully before handling, installation or use of
any hydraulic equipment. Failure to do so could lead to equipment damage, equipment failure, personal
injury or even death. Hi-Force will not be held responsible for any damage to the equipment, injury or death resulting
from the unsafe use of, lack of maintenance too, or incorrect operation of the product. If in doubt on the correct use
of any Hi-Force equipment, contact your nearest Hi-Force office or distributor. Only qualified personnel should be
allowed to operate hydraulic equipment. If an operator has not been trained on high-pressure hydraulic equipment
and its safe usage, consult your local Hi-Force sales office who can offer training courses for operators.
All operators should ensure that all necessary personal protective equipment as specified by their employer is worn
when operating any hydraulic equipment. Safety shoes, safety glasses/ visor and protective gloves should be worn
at all times. All relevant risk assessments should be completed prior to use of the equipment
3.2 Torque wrench Specific Safety Precautions
Read this entire manual before operating the torque wrench. Failure to observe the following warnings
could result in serious bodily injury. These instructions are part of the torque wrench. They must be
kept in a safe place for later use and be passed along with the torque wrench if it is sold, loaned, or otherwise
transferred. The torque wrench should be used only by TRAINED PERSONNEL who have been taught how to
safely use and handle the torque wrench. Using the torque wrench without training may result in SERIOUS
INJURIES or DEATH. Employers purchasing this torque wrench MUST ensure employees using the torque wrench
have read and understood these Operating Instructions prior to using the torque wrench. The Operating Instructions
MUST be available to the employees for reference at all times.
OVERLOAD HAZARD The torque wrench can be overloaded during use and break causing SERIOUS INJURY or
DEATH. ALWAYS use only original accessory parts. Accessory parts not approved by the manufacturer may cause
the torque wrench to overload or fail. ALWAYS inspect the torque wrench for damage BEFORE use. NEVER use
a damaged torque wrench. NEVER use the torque wrench if it has been dropped, used to strike other objects, or if
anything has fallen on it.
Hi-Force declares that this product has been tested and complies with the standards set out in the relevant EU
directives. The EU Declaration of Incorporation / Conformity is included as Annex A to this instruction document and is
supplied with all shipments of this product.
Operating Instruction Manual:
1.0 Inspection upon Receipt
2.0 General Description
3.0 Safety Precautions
Failure to observe and obey the following safety precautions could result in
property damage, significant personal injury or death.
4.0 Declaration of Incorporation / Conformity
OM-HTW-01
3
Serial Numbers:
FROM 79107887695