Hi-Force HTW1800B Panduan Petunjuk Pengoperasian - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Alat Listrik Hi-Force HTW1800B. Hi-Force HTW1800B 7 halaman. Manual torque wrench range
Halaman Cetak
6.2 Setting the Torque
Turn the nut on the end of the torque wrench handle until the required setting aligns with the end of the
handle tube.
HTW1000B
Never adjust beyond the marked scale or else calibration will be lost.
On the HTW2000B model there are two adjustment nuts. It is important that both nuts are adjusted equally to the
required torque value.
6.3 Operation
Select a socket of the correct size for the nut to be tightened, and with the correct size of square drive for the torque
wrench. Ensure the socket is in good condition. Fit the socket to the square drive of the torque wrench. Engage the
socket fully onto the nut and pull the torque wrench smoothly towards you. Make use of the ratchet mechanism to
keep the tool in a comfortable working range. Always pull the wrench squarely from the centre of the handle. HTW-
B models: When the required torque setting is reached, the wrench will "break" in the centre through a large and
easily visible angle. The tool mechanism is designed to ensure a smooth "break" to minimise the risk of the operator
losing balance. When hand pressure is relaxed the tool will reset for the next tightening cycle.
Operating Instruction Manual:
HTW1500B
HTW1800B
5
OM-HTW-01
HTW2000B
Serial Numbers:
FROM 79107887695