Hi-Force HHP50 Petunjuk Pengoperasian dan Keselamatan - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Keselamatan untuk Peralatan Industri Hi-Force HHP50. Hi-Force HHP50 4 halaman. Hydraulic hole punch

Halaman Cetak

MODEL SPECIFICATION

Figure 1.

Model

Maximum

Throat

Number

force tonnes

depth mm

HHP30

HHP50

SAFETY.

Read these instructions and safety warnings fully. Failure to do so could result

in Personal injury or equipment damage.

WARNING: Wear suitable personal protection equipment when operating

hydraulic equipment. Safety glasses are essential.

DANGER: Keep all body parts away from punch and work piece during

operation.

WARNING: Do not exceed rated pressure of tool (700 bar maximum working

pressure). Do not connect to a pump with a higher rated pressure.

WARNING: Ensure that all components in the system are rated for 700 bar.

CAUTION: Use a pressure gauge whenever possible.

DANGER: Do not handle pressurised hoses. Oil escaping under pressure from

a ruptured hose can penetrate the skin. If oil is injected under the skin it is a

serious medical emergency. See a doctor immediately.

CAUTION: Avoid damaging hydraulic hose. Always route hoses to ensure they

are free from sharp bends and kinks.

CAUTION: Always disconnect the punch from the pump when changing

punches and dies.

Rev 2. ECO No. 3890

Punch capacity (mm)

Steel plate

Hole punch

Thickness

diameter

up to 20.5

up to 25.5

Recommended pump & hose

Standard punch /

die sets included

Manually

operated

HP232

10.5, 13.5,

complete with

17.5, 20.5

HC3 3m hose

10.5, 13.5,

HP232D

17.5, 20.5, 25.5

c/w 2 x HC3

TDS1312

Pneumatically

Weight excl.

operated

Pump kg

AHP1120

13.0

complete with

HC3 3m hose

AHP1141

42.0

c/w 2 x HC3

Page 2 of 4