Agrident APR500 Manual - Halaman 4

Jelajahi secara online atau unduh pdf Manual untuk Pemindai Agrident APR500. Agrident APR500 14 halaman. Weight from scale
Juga untuk Agrident APR500: Manual (9 halaman)

Halaman Cetak

APR500 – Weight from scale

Weight from scale

1. Introduction

The APR500 is able to receive the weight from scales with RS232 and / or Bluetooth

The APR500 is able to receive the

interface and to store it together with the EID and the timestamp in the internal non-volatile

interface and to store it together with the EID and the timestamp in the internal non

memory.

This feature allows using non

This feature allows using non-EID-ready scales with a simple RS232 interface instead of

more expensive EID-

APR500, i.e. the reader has to know the serial protocol structure.

The current Firmware supports 3 types of scales:

irmware supports 3 types of scales:

Iconix FX15 / FX21

Tell

TruTest XR3000

The received weight is stored in the Alias field of the dataset – that means you cannot store

The received weight is stored in the Alias field of the dataset

the weight and an Alias in one and the same dataset. In addition to the EID and the

the weight and an Alias in one

an Action Code and an Action Code Plus might be stored.

2. Necessary requirements

Necessary requirements

In order to use the Weight from scale

serial connection. This can be either RS232 or Bluetooth (BT).

serial connection. This can be either RS232 or Bluetooth

2.1 Connection via RS232

For an RS232 connection you need the APC510 cable. This has to be plugged into the

APR500 and into the D-Sub connector of the scale.

APR500 and into the D

2.2 Connection via Bluetooth

Connection via Bluetooth

Please perform a search for the Bluetooth enabled scale as described in the APR500

Bluetooth manual. Select the scale as the BT partner after the inquiry has finished. The

APR should be configured to act as the Bluetooth master.

09.03.2011

weight from scales with RS232 and / or Bluetooth

ready scales with a simple RS232 interface instead of

-ready scales. Of course, the scale type has to be supported by the

ready scales. Of course, the scale type has to be supported by the

Weight from scale feature, the APR500 and the scale have to have a

feature, the APR500 and the scale have to have a

RS232

Please note that some scales might require an

additional null modem adapter in order to allow

communication with a reader, e.g. Iconix scales. This

has to do with the designated use of the device (either

as DTE or DCE). For details please see appendix A.

that means you cannot store

. In addition to the EID and the weight

reader, e.g. Iconix scales. This

If the connection is established, the

ion is established, the main

screen will display a

screen will display a Bluetooth symbol

and the green LED will flash periodically.

LED will flash periodically.

Some scales (like Iconix) might require

authentication for Bluetooth. In this case

please set the corresponding

corresponding passkey in

the APR500 Bluetooth menu

the APR500 Bluetooth menu. For Iconix

the passkey should be

the passkey should be '0000'.

Page 4 of 14