Great Lakes Biostar Scan Panduan Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Peralatan gigi Great Lakes Biostar Scan. Great Lakes Biostar Scan 16 halaman.

Air escape holes are present in the base of the

pellet cup and should be checked monthly to

ensure that they remain open. Use a .036" or

thinner diameter wire to open plugged holes.

Also, make sure the rim of the pellet cup and

the four blocks that support the cup are clean.

Clean and lubricate top gasket every 3 months.

Apply a drop of liquid dish soap onto the

gasket on the pressure chamber with a

fingertip. Identify potential gasket cuts or

irregularities. Remove the soap from the gasket

with a soft cloth.

Lubricate the side ring once each year.

Remove the gasket ring from the chamber.

Using a light grease (016-021), lubricate the

black gasket on the side of the ring. Replace

the ring with the top gasket facing up.

Check the air filter (A) for discoloration

monthly.

If replacing filter, turn off the air source and

bleed the high-pressure hose of air. Loosen

clamps holding the filter and slide it off the

hose. Position the new filter by referencing the

arrow on the filter case toward the back of the

Biostar.