Great Lakes GL840N12-2442-SS Panduan Petunjuk Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Kandang Great Lakes GL840N12-2442-SS. Great Lakes GL840N12-2442-SS 16 halaman. Nema enclosures

Halaman Cetak

PREFACE

This manual is provided to prevent service personnel from committing

an act that results in the risk of fire, electric shock, or injury to persons.

Only trained service personnel should receive, unpack, and assemble

the NEMA Enclosures. In addition, only trained service personnel should

install equipment in enclosures.

SAFETY SYMBOLS USED IN THIS MANUAL

This manual provides general safety guidelines to be observed during

installation, operation, and maintenance of the NEMA Enclosure.

WARNING: Failure to follow directions in the warning could result in

injury to persons or loss of life.

SAFETY CONSIDERATIONS

WARNING: Improper handling and use of the NEMA Enclosure could

result in equipment damage, serious injury, or possible death.

Only trained service personnel should be used to remove the enclosure

from the pallet. Also, be sure you have a sufficient number of service

personnel. Do not attempt to move enclosures by yourself.

Be sure to read and follow all individual manufacturer equipment

manuals for safety and installation instructions.

Proper spacing is required when installing electrical equipment to avoid

electrical shock. Maintain minimum spacing between the accessories

and components and the computer enclosure assembly for safe

operation of the equipment when installed in accordance with the

National Electric Code ANSI/NFPA 70-1999.

The ambient temperature operating range for the NEMA Enclosure and

accessories is +50 to +95° F (+10 to +35° C).

The non-operating temperature is -4 to +140° F (-20 to +60° C).

SERVICE

The NEMA Enclosures should be repaired by personnel trained by

Great Lakes, or returned to Great Lakes for repair or replacement.

Contact Great Lakes Technical Support at 814.734.7303 or at

greatcabinets.com