Gaggenau VG 232 AU Buku Instruksi - Halaman 18

Jelajahi secara online atau unduh pdf Buku Instruksi untuk Kompor Gaggenau VG 232 AU. Gaggenau VG 232 AU 19 halaman. Built-in gas cooktop
Juga untuk Gaggenau VG 232 AU: Buku Instruksi (19 halaman)

Halaman Cetak

7.4 Installing the appliance

Fig. 12

Fig. 13

Fig. 14

All manuals and user guides at all-guides.com

Proceed as follows:

– Produce the recess for one or several Vario

appliance(s) in your worktop. Proceed as

indicated on the installation sketch and the

dimension table. The dimension table contains

details of the space requirement for the trim

between the appliances.

Important: The angle between the cut surface

and the worktop must amount to 90° (Fig. 12).

– Mark the centre of the recess exactly.

Secure the securing rails on the front and rear

edges of the recess. Make sure that the lugs of

the securing rails lie on the worktop and that the

centre marking of the securing rails is precisely

flush with the centre marking on the worktop

(Fig. 13).

Secure the cover on the appliance before instal-

lation. See assembly instructions VD 201-010.

– Lower the appliance into the worktop. Make

sure that the engaging lugs on the appliance

lie exactly on the clamping springs. Press the

appliance firmly into the worktop. The engaging

lugs on the appliance "snap" into the clamping

springs (Fig. 14).

Note: When installing the appliance in granite

or marble worktops, have the holes produced by

a specialist or stick on the securing rails with a

temperature-resistant 2-component adhesive (metal

on stone).

Note:

Several appliances can also be installed in indi-

vidual recesses, as long as a minimum clearance

of 40 mm is kept to between the appliances.

5080006260ind01

en 10.03 SK