Gaggenau VI424 Buku Petunjuk - Halaman 9
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Kompor Gaggenau VI424. Gaggenau VI424 20 halaman. Induction wok
Juga untuk Gaggenau VI424: Buku Petunjuk (16 halaman)
Halaman Cetak
Residual heat indicator
The residual heat indicator indicates that one of the
cooking positions is still hot.
Do not touch the cooking position as long as the
illuminated ring around the control knob is still
flashing, even if the cooking position is already
switched off.
Cooking position
¦
Two-ring cooking position
The cooking position's outer ring element is acti-
vated automatically when a correspondingly large
item of cookware is placed on the cooking posi-
tion.
Special accessories
You can order the following accessories via your
specialist dealer:
WP 400 001
Wok pan
WZ 400 001
Wok pan support
VA 450 400
Appliance extension, 38 cm
VA 420 000
Connection strip for combination with
other Vario 400 appliances for flush
installation
VA 420 001
Connection strip for combination with
other Vario 400 appliances for flush
installation with appliance cover/
extension
VA 420 010
Connection strip for combination with
other Vario 400 appliances for surface
installation
VA 420 011
Connection strip for combination with
other Vario 400 appliances for surface
installation with appliance cover/
extension
VA 440 010
Stainless steel appliance cover
Only use the accessories as specified. The
manufacturer accepts no liability if these accessories
are used incorrectly.
Setting the cooktop
This section informs you how to set the cooking
positions. The settings table shows power levels and
cooking times for various meals.
Setting the power level
1
Press in the control knob and turn it to the
required power level (1-12 and booster function).
The cooking position indicator on the cooktop
flashes.
2
Place a suitable cookware item on the cooking
position within 90 seconds.
The cooking position switches off automatically if
a pot is not detected. To return the cooking
position to operation, turn the control knob to 0
and set the power level again.
3
When the cooking position is heating, the
cooking position indicator and the illuminated
ring behind the control knob light up
continuously.
Note: The outer ring element is added automatically if
a larger pot is placed on the cooking position.
Switching off the appliance
To switch of the cooktop, turn the control knob to the
0 position.
The residual heat indicator in the knob's ring flashes
slowly until the cooking position has cooled down.
9