Hi-Link HLK-RM08K Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Unit Kontrol Hi-Link HLK-RM08K. Hi-Link HLK-RM08K 7 halaman. Uart to ethernet application
Juga untuk Hi-Link HLK-RM08K: Panduan Pengguna (13 halaman), Panduan Pengguna (9 halaman)

Halaman Cetak
Hi-Link HLK-RM08K Panduan Pengguna
But if needed, it could change the module's IP into same network segment with upper IP.
Note : In bridge mode,serial transparent transmission is working in the local network,could not transparent
transmission to extra net.
Bridge mode configuration at commands
三．
AT commands setting :
at+OpMode=3
at+STASsid=8E20
at+STAEncType=6
at+STAPasswd=12345678
at+LANIp=192.168.2.130
at+APSsid=1920
at+APEncType=6
at+APPasswd=147258369
at+Dhcpd=0
at+Save=1
at+Apply=1
Shenzhen Hi-Link Electronic Co.,Ltd
Http://www.hlktech.ltd
Tel:0755-83575155 Fax:0755-83575189
7