Hi-Link HLK-LD2410C Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sensor Keamanan Hi-Link HLK-LD2410C. Hi-Link HLK-LD2410C 19 halaman. Human presence motion module

Halaman Cetak

1. Product Introduction

LD2410C is a high-sensitivity 24GHz human presence status sensing module developed by Hi-

link Electronics. Its working principle is to use FMCW frequency-modulated continuous wave to

detect human targets in the set space. Combined with radar signal processing and accurate human

body sensing algorithms, it realizes high-sensitivity human presence status sensing, and can identify

human bodies in motion and stationary states. And auxiliary information such as the distance of the

target can be calculated.

This product is mainly used in indoor scenes to sense whether there is a moving or micro-

moving human body in the area, and output the detection results in real time. The farthest sensing

distance can reach 5 meters, and the distance resolution is 0.75m. Provides a visual configuration

tool, which can easily configure the sensing distance range, sensing sensitivity in different intervals

and unmanned delay time, etc., to adapt to different specific application needs.

Support GPIO and UART output, plug and play, and can be flexibly applied to different smart

scenarios and terminal products.

HLK-LD2410C

Shenzhen Hi-Link Electronic Co., Ltd.

Figure 1 Diagram of usage

Page 3 / 19

Manual