Aircon Off SMART REMOTE Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kontrol Jarak Jauh Aircon Off SMART REMOTE. Aircon Off SMART REMOTE 6 halaman. Universal ac remote control with power saving
Juga untuk Aircon Off SMART REMOTE: Petunjuk Penyiapan dan Manual Pengoperasian (8 halaman)
Halaman Cetak
Direct Code Set Up
How to Pair the Smart Remote with your Air Conditioner
The code list on page 7 lists brands of air conditioners with the associated Smart Remote
brand codes.
These brand codes are Aircon Off numbers and are not the linked to the model numbers
that may be printed on the air conditioner or its associated paperwork.
The Smart Remote Brand Code List is indicative only and many air conditioner brands are
not specifically listed. If your brand is not listed or if the listed codes are not successful with
your AC, then use the Auto Search Function to find a matching code.
Direct Code Set Up
1. From the Code Table, select the correct codes for your brand.
Note: There are often many possible codes. Start with the first code, if this does not
operate your air conditioner, try the second code and so on until you find the right code.
For example: ALPIN, first try 0252, if this does not work, then try 0253, then 0764 etc.
2. If necessary unlock the Set Up Function.
3. Press the "SELECT" key, the Model Code display will flash on the LCD. Using the
keypad enter the selected 4 digit code. Press each digit in turn. Eg: To enter "0252", first
press the "0" key, then the "2" key, then the "5" key, and then finally press the last number
"2". The Smart Remote accepts the code automatically and you can use the numeric
keypad normally after the code is accepted. To test a code use the Blue Power Button. If it
turns the air conditioner "On", try other function keys. If the air conditioner does not turn
"On" or if other functions do not work correctly, then try another code. To input another
code, press the "SELECT" key again and enter the new code. Repeat this until all
functions work correctly, meaning you have set the correct code.
Brand Code Auto-Search (How to use Smart Remote When Listed
Codes Don't Work or My Brand is Not Listed)
Brand Code Auto Search Set Up:
1. If necessary unlock the Set Up Function.
2. Aim the Smart Remote at your air conditioner. Press and hold the "SELECT" key for 5
seconds and then release. The Smart Remote will go into auto-search mode and will emit
a continuous signal. The code numbers on the LCD display will flash and then steadily
increase. Keep the remote pointing at the air conditioner. (If the code numbers start too
high, use the TEMP+/- keys to scroll to the code that you want to start the Auto-Search
from.) When the A/C receives a signal it recognises it will make a beep.
When the AC beeps and turns on Immediately press any key to stop the count on
that code. If you don't stop the count in time, the air conditioner will have started
but will not turn Off (see 3.) You will need to unlock the Set Up Function again and
scroll back to the lower code number that activated the air conditioner.
3. Test the code fully by trying all normal function keys. If they do not work correctly
with the air conditioner you have not found a totally compatible code. Repeat steps 1 and
2 until a completely correct code is found and the air conditioner operates normally.
3