Hi-ltte Rambo 230 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perlengkapan Lampu Hi-ltte Rambo 230. Hi-ltte Rambo 230 9 halaman. 7r 230w moving head beam

Halaman Cetak

1. Menu Operation

CHANNEL

Channel

3 0-255:From dark to light dimming

DIMMER

0-3:white

4-7:white/color1

8-11:color1

12-16:color1/color2

17-20:color2

21-24:color2/color3

25-28:color3

29-33:color3/color4

34-37:color4

38-41:color4/color5

42-45:color5

46-50:color5/color6

51-54:color6

55-58:color6/color7

59-63:color7

Channel 1

64-67:color7/color8

Channel 4

64-67:gobo16 GOBO

COLOR

68-71:color8

72-75:color8/color9

76-80:color9

81-84:color9/color10

85-88:color10

89-92:color10/color11

93-97:color11

98-101:color11/color12

102-105:color12

106-109:color12/color13

110-114:color13

115-118:color13/color14

119-122:color14

123-127:color14/white

128-255:Rainbow colors from slow to fast

0-3:close beam

4-7:open beam

8-97:Strobe from fast to slow

Channel5

98-101:close beam

PRISM

102-126:Strobe from fast to slow pulse open

Channels

127-151:close the from fast to slow pulse strobe

SHUTTER

156-180:Random open the pulse strobe from fast to slow

181-205:Random close the pulse strobe from fast to slow

206-209:open beam

Channel6

PROTA

210-249:Random strobe from fast to slow

250-255:open beam

Channel 7: 0-255:

ZOOM

Channel 8:

0-3:white

0-255:

FROST

4-7:From slow to fast swing1

8-11:gobo2

Channel 9:

0-255:

12-15:gobo3

FOCUS

16-19:gobo4

20-23:gobo5

Channel 10:

0-255:

24-27:gobo6

PAN

28-31:gobo7

32-35:gobo8

Channel 11:

36-39:gobo9

0-255:

PANFINE

40-43:gobo10

44-47:gobo11

Channel12:

48-51:gobo12

0-255:

TILT

52-55:gobo13

56-59:gobo14

Channel 13:

60-63:gobo15

0-255:

TILTFINE

68-71:gobo17

Channel14:

72-115:Clockwise from fast to slow rainbow pattern

0-255:From fast to slow speed

PTTIME

116-159:Counterclockwise pattern from slow to fast rainbow

160-165:gobo1 From slow to fast swing

0-13:No function

166-171:gobo2 From slow to fast swing

14-24:Pan/Tilt moves exchange light

172-178:gobo3 From slow to fast swing

25-35:Gobo moves exchange light

179-184:gobo4 From slow to fast swing

36-46:Color changes exchange light

185-191:gobo5 From slow to fast swing

47-57:Prism selects exchange light

192-197:gobo6 From slow to fast swing

58-68:Frost selects exchange light

198-203:gobo7 From slow to fast swing

69-79:XY

GOBO

color

、

204-210:gobo8 From slow to fast swing

FROST changes exchange light

211-216:gobo9 From slow to fast swing

Channel 15

80-90:GOBO

、

color

、

focus

217-222:gobo10 From slow to fast swing

FUNCTION

function transfers exchange light

223-239:gobo11 From slow to fast swing

91-123:No function

240-245:gobo12 From slow to fast swing

124-134:Display Reverse (5 seconds)

135-145:Forward screen (5 seconds)

246-251:gobo13 From slow to fast swing

146-155:No function

252-255:gobo14 From slow to fast swing

156-165: Internal motor reset, except pan&tilt

0-127:without prism

166-167 No function

128-255:with prsim

168-189 All function reset

191-255 No function

0-63:0 to 360 degrees positioning

0-31:No function

64-127:Clockwise rotation from fast to slow

128-191:Counterclockwise rotation from slow to fast

32-63:Lamp down power (immediate action)

Channel 16

64-159:No function

192-207:90Degree swing from slow to fast

LAMP

160-191:Turn off lamp(5's)

208-223:180Degree swing from slow to fast

function

224-239:270Degree swing from slow to fast

192-223:no function

240-255:360Degree swing from slow to fast

224-255turn on lamp(5's)

FAILURE SCOREBOARD AND SOLUTIONS

Listed below is a common approach in the operation of a

few common problems.

◇Fault A: The lamp is not working, the bulb is not lit, the fan

does not work

Solving 1: Check the power supply or the fuse is burned Solve 2: The

main power connector on the voltage detector ◇Fault B: connect control

units, lighting does not respond Solving 1: After connecting control units,

lighting should be working. If it is not working properly, check the signal

cable plugs and wires are connected correctly.

Solve 2: If the lamp is lit display, but the channel does not

respond, check the address code is set correctly and DMX

output voltage polarity.

Solve 3: DMX signal problems if your lighting is off,

check the input terminal and the circuit board Solve 4:

Please change another one DMX controller

Solve 5: Check whether the signal cable near high voltage power

lines caused DMX display board inside the wire damage.

focus

、

FROST head

◇Fault C: some channel is not working Solving 1:

stepper motor may be damaged,

or the line connecting the motherboard burned out Solve 2:

IC driver board on the motherboard may be damaged

CLEAN LIGHTS

Must regularly clean the outside of

the optical lens focusing the dust。

Based on the number of lamps use a

deaner

clean environment to determine:

Are moist, smoked or the

surrounding

environment is particularly dirty, which

can cause dust deposition lamps. Please

use a glass cleaning solution and a soft

cloth to wipe the focusing

optical lens. Carefully Qi dry each

part. At least 20 days to clean the

dust outside a lens, the lens inside

30-60 days to clean up the dust once.

Regular inspection lamp fan and bottom case fan, a fan of at least 20\days

to clean up dust deposition. Above cleaning must be executed in case of

power failure.

230W MOVING HEAD BEAM LIGHT SHINES TABLE

PHOTOMETRICS DIAGRAM 3.8

3.8

540000

150000

64000

35000

14000

3.8

122

165

250