Hi-ltte RAMBO330 3in1 Series Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perlengkapan Lampu Hi-ltte RAMBO330 3in1 Series. Hi-ltte RAMBO330 3in1 Series 9 halaman. 330w 3in1 beam-spot wash

Halaman Cetak

SAFETY TIPS

◇Before using this product, please observe carefully the product is not unwrap or damage during transportation.

As a result of damage during transporting , please do not use the lights, and contact with the dealer or manufacturer.

◇Before running products, to ensure that the voltage and Hertz in accordance with the requirements of lights.

◇It's very important, connecting ground wire to avoid the electric shock.

◇This product is for dry indoor environment.

◇This product must be installed on the sufficient space, adjacent to interface the shortest distance of 50 cm,

to ensure that the lights will not crash each other.

◇Before moving or repairing the product , please unplug the power.

◇When it working, ensure that no inflammable and explosive near objects.

◇When installing this product, please use the safety rope. When handling this product, lift the armrest base,

rather than the lamp body.

◇This product is suitable for a maximum temperature of 35 degrees Celsius, when the surrounding environment

is higher than 35 degrees Celsius, please do not use this product.

◇Do not touch. When working, the product running very fast, to prevent bruising hands.

◇Problems happens when operating performances, should immediately stop using the lights.

Do not carry out maintenance, repair damage caused or likely to cause other problems.

Please contact the company's maintenance repair. During the repair process, use the same type of accessories.

◇Please read the instructions carefully, especially regarding the installation, using, maintenance parts.

Important that the lighting in the transport process, must be packed anti-shock protection carton or flight case

Please read the guide book, the guide book

that contains the installation, use and

maintenance of important information

◇DMX Channel:16/24CHs

◇Control model:DMX512,Auto model

◇LED LCD Display+Press button,English/Chinese,

Diplsay board intelligent flip function.

◇Light Source:Yodn 16R lamp

◇Super fast and ultra silence 3-phase step motots

◇Color temperature is 8000K,life span is 2000Hs.

◇13 Color with white,dual color effect.

◇14 fixed gobo with open circle

◇9 changeable rotating three-dimensional gobo withwhite.

◇Any two-kinds prism stack can combine dynamic effect

positive and negative rotation switching effect.

◇Optical lens: High precision glued optical lens combination

Extended features: support disconnecting

the power supply, the display panel set up address

code (had to pre-equipped with batteries).

TECHNICAL PARAMETERS

◇Focus: Linear focus

◇Zoom: Linear zoom.

◇Dimmer: 0-100% linear dimmer.

◇Beam angle: 2.5-35 degree.

◇Strobe: two-pieces plate strobe(0.5-9FPS

◇16pcs super silence motors,pan&tilt 3-phase step motors,16bit.

◇Housing: High temperature resistant alloy plastic

◇IP Rate: IP20

◇Weight:18.6KG

◇Size: 361*300.8*601.8mm